SureCall Wide Band Rubber Right Angle Antenna (SC-120W).
SureCall Wide Band Rubber Right Angle Antenna (SC-120W).
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-120W
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
- Warning
Description
Product Description
Also known as a whip antenna, SureCall Wide Band Rubber Right Angle Antenna (SC-120W) is an omni-directional type of antenna that stands at a right angle. It is best suited with SureCall's mobile signal amplifiers such as the RV cell phone boosters. This antenna offers a gain of 3 dB to use inside a car or truck and can be used with multiband (700, 800 & 1900 MHz), tri-band and dual band mobile boosters particularly for vehicles.
The rubber wide band right angled antenna draws cell signals from around. SC-120-W is available in wide-band version. It is compatible with diverse networks supporting different services. Such services include Verizon's 4G LTE, 3G Data and 2G Voice, T-Mobile's 4G, HSPA+ and 3G Data, Sprint's 3G Data and 2G voice as well as AT&T’s 4G LTE, 4G HSPA+, 3G Data and 2G voice among a huge number of Canadian networks as well.
SureCall SC120 or SC120W has an impedance of 50 Ohm, 3dB gain, 1.2 oz in weight and an FME-Female connector type.
Sure-Call SC-120W Right Angle Antenna Set-Up.
Note: It is suitable for mobile boosters or amplifiers which do not require direct connection to cell phone.
- Screw antenna directly to booster into connector marked, "Inside".
- Position antenna upright using the hinge provided.
Sure Call SC-120W Specifications.
| Frequency | 698-787/806-924/1850-1990MHz |
|---|---|
| Input Impedance | 50 ohm |
| Antenna Gain | 3dB |
| Beamwidth | 118/140 |
| VSWR | ≤2:0 |
| Polarization Type | Vertical |
| Radiation | Omni-directional |
| Maximum Power | 10 W |
| Connector type | FME – Female or based on customer request |
| Cable type | None |
| Height (inches) | 7 1/8” |
| Weight | 1.2 oz |
| Ground Plane | Built-in ground plane |
| Mount | mount to booster |
| Operating Temperature | -22°F to +140°F |
| Color | Black |
| U.P.C. | 896831002494 |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Data Sheet
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
