Power Supply 6 ft. Extension with Industrial-Grade AC Surge Protection
Power Supply 6 ft. Extension with Industrial-Grade AC Surge Protection
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 1101-058
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Transtector SL-V 120 V Silicon 15A Power Supply 6 feet Extension with Industrial-Grade AC Surge Protection is 120 Vac plug-in silicon surge protection for 15 A applications with 6 NEMA 5-15 receptacles.
Features:
- 6 foot cord.
- Metal enclousure.
- Silicon diode technology.
- Status indication.
- Line and load bidirectional protection.
120 Vac plug-in silicon surge protection for 15 A applications with 6 NEMA 5-15 receptacles. The SPD offers bidirectional silicon avalanche diode suppression technology and is typically installed to protect 120 Vac power equipment from transient over-voltages. The surge cord features On-Off switch and visual status indication. A red LED indicates that the SPD is operational and power is applied to the outlets. If the LED is off, check the power source. If power is available at the wall receptacle, and the LED is dark, the SPD needs to be replaced. If the LED is dark, power will not be supplied to any equipment plugged into the surge cord.
Specifications:
| Tested Standards | IEEE Category A, ANSI/IEEE Suitable for Location A3 per C62.41-2002, C62.45-2002 |
|---|---|
| Motorola Part | DSSLV |
| Technology | Silicon Avalanche Suppression Diode |
| Nominal Operating Voltage | 120 Vac |
| Maximum Continuous Operating Voltage | 138 Vac |
| Minimum Voltage Protection Level (8x20μs) | 220 V Peak |
| Maximum Voltage Protection Level (8x20μs) | 330 V Peak |
| Suppression Power (10x1000μs) | 24 kV |
| Response Time | < 5 ns |
| Input (Surge Side) | NEMA 5-15 Plug |
| Output (Equipment Side) | Six NEMA 5-15 Receptacles |
| Status Indication | LED (Red = SPD operational, Off = Replace) |
| Location Category | Indoor only |
| Method Of Mounting | Plug in |
| Dimensions (H x W x D) | 13" x 2.5" x 1.5” (330 mm x 635 mm x 38.1 mm) |
| Weight (Max) | 12 oz (0.34 kg) |
| Cord Length | 6 foot (1.82 m) |
| Operating Temperature | -20 degrees C to +50 degrees C |
| Humidity | ≤ 95% Non Condensing |
| Enclosure Protection Level | NEMA 12 |
| Housing Inflammability Rating | Steel Case |
| Manufacturer | Transtector Systems, an Infinite brand. |
| Model | SL-V |
| UPC | 888063224218 |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
