1/2 inch thick Plenum Air Coaxial Cable (priced per foot)
1/2 inch thick Plenum Air Coaxial Cable (priced per foot)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: ICA12-50JPL
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Questions & Answers
- Make An Offer
Half inch thick Plenum Air Coaxial Cable (priced per ft). This RFS ICA12-50JPL 1/2 inch plenum-rated coaxial cable features an air dielectric. This 50 Ohm coax cable has a blue jacket. This air dielectric cable has an annular corrugated copper outer conductor and copper-clad aluminum inner conductor. Maximum frequency capacity is 6.0 GHz. This transmission line uses 1/2 in standard connectors. It is available in bulk and is priced per foot.
These frequency signal transmitting coax cables are used in systems such as cell phone signal booster, repeater, distributed antenna system (DAS), bidirectional amplifier (BDA) systems, etc. to connect antennas with system components such as cellular amplifier main base unit. Trimming tool and cable connector not included with purchase. They must be purchased separately, as needed.
Please Note: This half an inch thick coax. cable is available in bulk and is priced per foot because it is sold by the foot. Therefore, after adding this item to cart, please update "quantity" in shopping cart based upon number of feet required.
ClearFill®Line 1/2" low loss air dielectric cable, Plenum-rated, CMP.
Not Eligible for free shipping
Features / Benefits:
- Supports Multiple RF Signals.
- Complete Shielding. The solid outer conductor of the ClearFill Line coaxial cable creates a continuous RFI/EMI shield that minimizes system interference.
- Outstanding Intermodulation Performance. RFS coaxial cable's solid inner and outer conductors virtually eliminate intermods. Intermodulation performance is also confirmed with state-of-the-art equipment at the RFS factory.
- Wide Range of Applications. Typical areas of application are feedlines for plenum-space installations within occupied buildings or structures but also suitable for outdoor use due to jacket UV rating.
|Inner Conductor||4.8 (mm); 0.19 (in)|
|Inner Conductor Material||Copper-Clad Aluminum Wire|
|Dielectric||11.8 mm; 0.464 in|
|Dielectric Material||Extruded Polyethylene|
|Outer Conductor||13.8 mm; 0.54 in|
|Outer Conductor Material||Corrugated Copper|
|Jacket||15.93 mm; 0.627 in|
|Jacket Material||PVC, Plenum Rated / Color Blue UV rated to ASTM G155, Water-resistant|
|Cable Type||Air-Dielectric, Corrugated|
Testing and Environmental:
|Fire Performance||Flame Retardant, Plenum Rated|
|Flame Retardant Jacket Specifications||Meets/Exceeds Steiner Tunnel Test Method UL 910, NEC 820-53 (a) CMP, NFPA-262.|
|Regulatory Compliance||NEC Article 800 Communication Circuits; ETL Listed to UL444; Canadian CSA C.22.2/FT6|
|Installation Temperature||-20 to 60 Degrees Centigrade; -4 to 140 Degrees Fahrenheit|
|Storage Temperature||-40 to 85 Degrees Centigrade; -40 to 185 Degrees Fahrenheit|
|Operation Temperature||-40 to 85 Degrees Centigrade; -40 to 185 Degrees Fahrenheit|
|Impedance||50 +/- 1 Ohm|
|Maximum Frequency||6 GHz|
|Capacitance||76 pF/m; 23.2 pF/ft|
|Inductance||0.19 uH/m; 0.058 uH/ft|
|Peak Power Rating||40 kW|
|RF Peak Voltage||2000 Volts|
|Jacket Spark||8000 Volt RMS|
|Inner Conductor DC Resistance||1.48 Ohm / 1000 m; 0.45 Ohm / 1000 ft|
|Outer Conductor DC Resistance||1.9 Ohm / 1000 m; 0.58 Ohm / 1000 ft|
|Return Loss (VSWR) Performance||24 (1.13) @ 698-960 MHz; 24 (1.13) @ 1395-1432 MHz; 24 (1.13) @ 1700-2155 MHz; 20 (1.22) @ 2300-2700 MHz; 18 (1.29) @ 3550-4200 MHz; 18 (1.29) @ 5150-6000 MHz|
|Cable Weight, Nominal||0.37 kg/m; 0.25 lb/ft|
|Minimum Bending Radius, Single Bend||76 mm; 3 in|
|Minimum Bending Radius, Repeated Bends||127 mm; 5 in|
|Bending Moment||4.1 Nm; 3 lb-ft|
|Tensile Strength||1112 N; 250 lb|
|Recommended / Maximum Clamp Spacing||0.5 / 0.9 m; 1.8 / 3 ft|
|Crush Strength||1.964 kg/mm; 110 lb/ln|
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.