3G 4G LTE Log-Periodic Dipole Array Antenna (LPDA)
3G 4G LTE Log-Periodic Dipole Array Antenna (LPDA)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: A62-V44-100
Need similarly powerful exterior 50 Ohm directional antenna with up to 26 dBi Gain option? For extremely weak signal areas, consider unidirectional RF-Boost High Power Long Range Antenna to replace any 50 Ohm Yagi / LPDA or Omni antenna within your signal enhancing system. It is ultra wide-band and ultra directional parabolic metal grid antenna. It requires precise directional focusing using signal meter for max. add'l Gain of up to +26 dB.
- Questions & Answers
- Make An Offer
Cel-Fi LPDA Antenna offers a powerful 12 or 14 dBi gain (depending on carrier frequency) over 698 through 2700 MHz frequencies. This is the best and longest distance antenna for all types of donor or tower antenna applications for in-building cellular signal boosters. It is designed to reduce out of band noise, to improve SiNR and overall signal quality.
Mounting is made simple with a mast down-tilt bracket and U-Bolts. This enables you to mount the antenna on a flat surface or a pole. A 45 degree mount attachment enables antenna to be mounted at a tilt, for optimal matching of macro donor signals. Includes bracket/ pole mount, black 10 meters long cable with type N female connector. CelFi SKU: 591NA6224050CV44. Model number is A62-V44-100 / A62V44-100 / A62-V44100 / A62V44100. UPC: 697691016528. Item title: Nextivity Cel-Fi QUATRA LDPA Yagi Antenna 12 to 14 dBi.
Summary: Nextivity Cel-Fi GO-X/ GO RED/ PRO-EXA/ QUATRA Outdoor Wideband Directional LPDA Antenna - Bracket/ Pole Mount - Black 10 inches Cable with LTE N-Female Connector.
- Suitable for all mobile carriers.
- Comes with mast down-tilt bracket and U-Bolt mounts.
- Includes 10 INCHES RG58 Cable N-type Female connector.
- Fully welded construction.
|Frequency Range||698 to 960 MHz and 1710 to 2700 MHz|
|Gain||12 dBi (698-960 MHz) and 14 dBi (1710-2700 MHz)|
|Lightning Protection||DC Ground|
|Horizontal Beamwidth||55°/ 42°|
|Vertical Beamwidth||46°/ 34°|
|VSWR||≤ 2.5 (698-960 MHz) and ≤ 1.8 (1710-2700 MHz)|
|Maximum Input Power||50 W|
|Mounting Pole||38 x 52 mm|
|Operating Temp||-40 degrees C to 65 degrees C|
|Cable length||27 cm|
Questions & Answers
QUESTIONS & ANSWERSAsk a Question
I’m trying to compare this antenna to the best parabolic antenna I can find. The only cell tower around is 4.1 miles from me but have trees around. My cell signal is 1 bar , around -125. I can get spoty LTE signal around me in places to be able to make a call. I have AT&T, from my understanding they broadcast between 710-716 and 740-746 MHz here. Best parabolic gets me 10 db whereas this gets me12 to14 DB if I'm right? Which would be better? I'm hoping to keep from putting up a 100 ft. Radio tower.
This antenna is good but there's another that may work better in your situation. But it is ultra-focus directional antenna with very small degree transmission so it has to be pointed very precisely towards the cell tower using a signal meter. It offers up to 26 dBi Gain and can catch signals up to 10 miles away. Yes, it is ultra wideband covering all wifi, cellular as well as upcoming 5G frequencies. Have a look at it here:
What is the wind rating on this antenna?
I apologize, but we don't have the wind rating information for this LPDA antenna. As long as it is fastened properly, it should withstand the wind conditions that a typical house, or its roof can normally withstand.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.