Wide-band 3G and 4G LTE Vehicle Roof Mount Antenna (Screw-on/ Drill-in/ NMO Type) with Threaded Bolt, 10 ft. Cable, and SMA Male Connector. This exterior antenna for cars, trucks, RVs, etc. is highly recommended for permanent, durable, and rugged installation. Examples of types of automobiles where this antenna can be suitably installed are service trucks, RVs, pick-ups, SUVs, vans, cars, minivans and any auto that does not have metal roof/ trunk for installing other kinds of antennae such as magnet based antennas. SKU: 591NA41100C64V36. Model #: A41-V36-100 / A41V36100.

This 50 Ohm impedance outdoor wideband cellular omni-directional antenna provides 2 to 4 dB gain depending upon signal frequency. While it is tuned for 700 MHz LTE bands (bands 12, 13, 28), it performs well for 800 MHz LTE bands (bands 5, 8, 20). The weather-resistant IP67 plastic casing is built to securely attach to roofs and trunks of all types of autos, trucks, vans, SUVs, and RVs. This is a low profile antenna with only 3 inches height but attracts cell phone/ mobile signals from all directions when installed vertically.

3" low profile wide band antenna features wide band 2G, 3G, 4G LTE coverage from 698 MHz to 960 MHz, 1710 MHz to 2700 MHz, and 2500 MHz to 2700 MHz. It is an external antenna (AKA., Donor Antenna, Outside Antenna, External Antenna) for outside the vehicle. It is entirely weather-proof. The threaded bolt drilled through the roof or trunk of any vehicle can withstand most extreme weather and wind speed conditions. Carriers supported include T-Mobile, Verizon, AT&T and  Sprint. 

Summary: Nextivity Cel-Fi GO-M Outdoor Donor Antenna - Threaded Bolt - Black 10 ft. Cable - LTE (SMA M).

Features:

• Wide band (698 to 2700 MHz) - 2G / 3G / 4G LTE.
• Omni-directional antenna can receive signals from all directions.
• 2 dBi to 4 dBi Gain.
• For all 50 Ohm input impedance signal amplifiers.
• SMA-Male connector.
• Includes 3M brand low-loss high-performance ten feet cable.

Vehicle Exterior Antenna Set-Up:

• Clean the vehicle roof mounting surface before drilling hole.
• Do not choose position of antenna within 1.5 feet of other antennae.
• Drill hole and insert threaded portion inside.
• Connect provided cable to threaded bolt from inside vehicle.
• Finally, attach that antenna cable's other end to connector of booster marked, "Outside".

Drill Mount Antenna Specifications: