4 Way RF Power Divider Combiner Splitter w/ SMA Female (50 Ohm)
4 Way RF Power Divider Combiner Splitter w/ SMA Female (50 Ohm)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: ISWPD2140AFC
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Four-Way RF Power Divider, Combiner, Splitter has 50 Ohms impedance. It has Type SMA female connectors. This four-way wide-band divider, combiner, and splitter covers 698 MHz through 2700 MHz frequencies.
4 Way Power Divider, Combiner, Splitter has SMA Female (Jack) Connectors. Specs.: 0.7-2.7 GHz, 40 Watts, 50 Ohm, 0 Degree, PD2140, RoHS. Precise frequencies: 0.698 - 2.700 GHz.
Features:
- Wideband Frequency ideal for DAS (698 - 2700 MHz).
- Low Insertion Loss (0.4 dB Avg).
- High Port to Port Isolation (30 dB Avg).
- Excellent VSWR (1.10 : 1 Avg).
- RoHS Compliant Splitter Construction.
- Tri Alloy Type SMA Female (Jack) Low PIM.
- Impedance: 50 Ohms.
Technical Specifications:
Frequency Range | 698-2700 MHz. |
---|---|
Insertion Loss above 6.02 dB | 0.8 dB max. |
Amplitude Balance | 0.2 dB max. |
Phase Balance | 4° max. |
Isolation | 22 dB min. |
Input VSWR | 1.25 : 1 max. |
Output VSWR | 1.15 : 1 max. |
Mechanical Specifications:
Circuit Design | Wilkinson Microstrip passes DC Current thru all ports. |
---|---|
Connectors | SMA Female, 50 Ohm Coaxial. |
Body | Brass, Tri-Alloy Plate. |
Connector Pin | Beryllium Copper, Gold Plate. |
Insulator | PTFE, Virgin Electrical Grade. |
Housing | Aluminum, Clear Chem Film. |
Operating Temperature | -65°C to +85°C. |
Weight | 383 Grams. |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Please check outside signal level in decibels before ordering. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
If it is too weak, submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.

Related Products