Cart 0

500 ft. RG-11 Coax Cable, 75 Ohm, Black, No Connector | weBoost 951155

500 ft. Roll of RG11 Coax Cable with No Connectors | weBoost 951155 by Wilson Electronics / WilsonPro

500 ft. RG-11 Coax Cable, 75 Ohm, Black, No Connector | weBoost 951155

  • Regular price $549.99 USD Sale price$449.99 USD
Best Price Guarantee. [1, 2, 3]
  • Product Url
  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • *These fields required. [2] May exclude very large size items because we offer free shipping so our actual cost may be too high due to the size/ weight of item to be able to match the price. [3] Request must be made before order placement. Not valid after order placed. Other restrictions may apply. Please contact us for details.

Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.

Free Lifetime Support. SKU / Model: 951155

Best Price Guarantee [1 2 3]

Call for FREE consultation:


Need installation quote, or help with designing a custom solution? Submit a request for quote.

  • Description
  • Reviews
  • Questions & Answers
  • Make An Offer
  • Warning


Product Description

500 ft. Roll of RG11 Coax Cable with No Connectors | weBoost 951155 by Wilson Electronics / WilsonPro.

RG-11 low loss coaxial cable (75 Ohm) in spool, bobbin, cylinder or reel on which 500 feet of wire is wound is black in color. It does not come with any connectors on both ends. These're for indoor/ outdoor cable connections between signal amplifier to both inside or outside antennas. These're cables and adapters like regular TV or video cables typically found in homes.

This is an ultra low-loss coaxial cable made by weBoost / WilsonPro (both have same parent company, Wilson Electronics). It has practically the same minimal signal loss as the standard LMR-400 cables. It features 2/3rds the loss of RG-6 cables (less than 65% of the signal loss of a standard RG6 cable). It is great for connections between an amplifier to both indoor and outdoor antennas, taps, splitters or lightning surge protectors.

This cable has 13/32 inch diameter. It incurs around 1-2 dB of additional loss per 100 feet of cable. Please note that 75-Ohm cables cannot handle as much mobile data traffic as 50-Ohm cables. Therefore, in high user situations, you may see a reduced data speeds. This low loss foam cable can be used both indoors and outdoors with connections between amplifiers and antennas, taps, splitters and lightning surge protectors.

Coaxial cables form an integral aspect of cell phone signal booster installations. Cables run from donor antennas (outdoor antennas) to signal amplifiers, and then connect to antennas inside (broadcast antennas) to distribute the boosted signal. Connectors join the cables using male to female adapters (not included). Connectors link cables between signal meters and outside antennas, and come in handy whether making wireless signal readings or installing a new system.

For parts and accessories like this, you can count on Perform a search at this website for F-Male connectors you will need, as well as RG-11 stripping tool and a RG-11 crimper to get the job done perfectly.

What can the maximum length of cable be?

Generally, recommends keeping the length of coax cables at or under a hundred feet total from wireless signal amplifier to inside or outside antenna. However, this depends on the strength of signal outside, the loss incurred in the type of coaxial cable being used, the loss through splitters and / or taps, and how much coverage space would be needed. With a good outside signal, higher quality cables, and higher-grade amplifiers, there're plenty of ways to be able to have longer cable runs. For example, if you have a strong outside signal of -40 dB, you can consider a cable run of around 155 feet from donor to amplifier and still have plenty of signal for the cell amplifier to work with.

How do I terminate RG11 cable?

You will need a RG11 stripping tool and a RG11 crimper to do the job right. Some dikes or a cutting tools are also a handy tool to have around for the task.

First take the RG-11 stripping tool and line it up with the edge of your cable. Spin the tool around the cable several times. You will feel the stripper cut through the shielding as you spin it around the cable. Pull the stripping tool off and remove any remaining pieces that remain. You will be left with something.

Peel the braided metal shielding back so it looks workable. Make sure that no metal shielding makes contact with the center pin. Then slip the RG-11 connector onto the cable. Be sure that the pin from the cable is properly inserted into the pin already in the connector. If the pin is too long, trim from the cable pin and try again until it fits properly. Do not trim the pin of the connector.

Place the connector and cable into the RG-11 crimper and crimp down firmly, bouncing the crimper a few times to ensure you have got a solid crimp. That is it. Now just measure out your cable to the proper length and repeat the process on opposite end.


Part Number: 951155.
Description: 500 ft. RG11 Black Cable.
Diameter: 13/32 inch.
Impedance: 75 Ohm
UPC: 811815023753.


Customer Reviews

Questions & Answers


Have a Question?

Be the first to ask a question about this.

Ask a Question

Data Sheet / User Guide

Make An Offer

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • Input Correct Captcha


Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.

Kevin K. of Anderson, California gave the following review:

Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.

Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.

If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.

For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.

Related Products
500 ft. RG-11 Coax Cable, 75 Ohm, Black, No Con...