Cel-Fi Antenna Mount
Cel-Fi Antenna Mount
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 591NF66000000000
- Questions & Answers
- Make An Offer
Cel-Fi Antenna Mount has been designed for the Cel-Fi QUATRA system and can be used outdoors or indoors to position a Coverage Unit as a server antenna, or Network Unit as a donor antenna. This unit is compatible with the Cel-Fi WAVE Antenna Positioning Application. SKU: 591NF66000000000. Model # F66-100-000/ F66-100/ F66100/ F66100000. Item title: Nextivity Antenna Mount (for PRO, Quatra, GO).
The WAVE platform is a mobile app that determines the optimum antenna direction. That app is available for desktop, Android, and iOS. An antenna can be rotated in 45-degree steps for best performance with the 8-position dial base. This process is managed with real-time data from the Cel-Fi WAVE Platform Antenna Position Test function.
This mount is a 26 cm powder-coated pole with stamped metal surface and can be used to mount to a pole, ceiling, or wall. The flexible hole pattern allows for multiple mount types.
Donor Antenna position.
An antenna is used for a Network Unit and should be mounted at a window with a clear view to the outside cellular network. To avoid feedback (oscillation), an antenna should not be directed at any nearby Coverage Unit.
Server Antenna position.
An antenna is used for a Coverage Unit and should be mounted and aimed where coverage is required. To avoid feedback (oscillation), the antenna should not be directed at the Network Unit donor antenna.
This Cel-Fi Antenna Mount part # is F66-100.
Summary: Nextivity Cel-Fi Antenna Ceiling/ Wall Mount - For GO-X/ PRO/ QUATRA - Indoor/ Outdoor.
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Please check outside signal level in decibels before ordering. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
If it is too weak, submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
1 Fabric Cover Panel Antenna Expansion Kit (75 Ohm) | weBoost 314440-1
1 Ft. Magnet Antenna (50 Ohm) for Vehicles (SMA-Male) + Adhesive Disk | weBoost 311125
1 Indoor Surface Mount Dome Antenna 50 Ohm w/2-way Splitter & Cables