Cel-Fi GO M 65 dB Gain Bell, Rogers, Telus, Freedom Mobile Booster
Cel-Fi GO M 65 dB Gain Bell, Rogers, Telus, Freedom Mobile Booster
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 590NG32GWUS6ATUS6TF1-CA
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
Cel-Fi GO M vehicle cell phone signal booster is for boosting reception of any single Canadian Carrier network (switchable) at one time such as Bell, Rogers, Telus, Sasktel or Freedom Mobile. It is suitable for using in vehicles including cars, trucks, SUVs, RVs and marine vessels. The Go-M uses Nextivity's Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage for 3G, 4G, and LTE.
This Cel-Fi GO M Vehicle Bundle has the vehicle cell phone signal booster kit which comes with magnet-mount exterior roof-mount antenna. Optional screw mount NMO antenna (part # A41-V36-100 / A41V36100 / 591NA41100C64V36 and kit UPC 697691004242), RV or Trucker antenna (A21-V31-100 / A2-V31100 / 591NA21260C64V31 and kit UPC 697691004259), and Marine antenna (part # A11-V37-100 / A11V37100 / 591NA11260C64V37, 30 feet cable part # GW195-360-SM-SF cable type LMR-195 and connector SMA Male to SMA Female, and kit) also available. See drop-down menu for options to buy this kit with respective optional antennas.
Nextivity Cel-Fi GO-M Band 2/4/5/12/13MKit provides gain of 65 dB with Intelliboost technology. The GO M can adjust to changing cellular network conditions automatically while you're on the move. This unit also supports multiple devices. The Cel-Fi GO M for RV / Truckers bundle includes the Cel-Fi Trucker Antenna and Server Antenna, and is an ideal solution for cross country trucking or remote RV stays. The Cel-Fi GO M for Marine bundle includes the Cel-Fi Marine Antenna and Server Antenna, plus 30 ft. of cable. It is an ideal solution for near shore or water recreational, ferrying, or shipping vessels.
As this version of the Cel-Fi GO M only boosts signals for any one carrier at a time, it is a good choice for one or more people on a single network such as Bell Mobility, Rogers Wireless, Telus Mobility, Sasktel or Freedom Mobile. However, if multiple people on multiple networks are using the vehicle, a simultaneous multi-carrier vehicle booster that works for all carriers at the same time may be a better option.
The NEMA 4 weather resistant rating means that the unit is protected against windblown dust and falling dirt, and water such as rain, snow, sleet and hose directed water. The unit will not be damaged if ice forms on the outside of the enclosure.
Cel-Fi WAVE Mobile App.
Cel-Fi WAVE smartphone app runs on the GO M and will help you get the best performance from it. That app is available for Android and iOS. It provides a User Interface to Cel-Fi systems. Application's dashboard shows the system's "Boost" value, allowing you to monitor the signal gain the GO M provides.
- Mobile Coverage for cars, trucks, RVs, and boats.
- Boosts 3G / 4G / LTE Voice and Data.
- NEMA 4 Rating.
- Multi-Carrier Support with Carrier Switching (one carrier coverage at a time).
- App for Optimized Performance.
- Network Safe.
Cel-Fi GO M offers a choice of two donor (outside) antenna options:
Both the Cel-Fi Mobile Magnetic Mount and Screw Mount Antennas are two of the best-performing antennas in their footprint on the market. They are outdoor wideband cellular omni-directional antennas with 2 to 4 Decibel Gain. Both feature weather resistant IP 67 plastic casing and have 3 meters (10 ft) of DACAR302 coaxial cable attached.
Cel-FI Mobile Mag. Mount Antenna is built to magnetically attach to cars, trucks, vans, SUVs, and RVs. The Cel-Fi Screw Mount Antenna has screw fixings.
Cel-Fi Mobile Server Antenna is a cellular / LTE patch antenna. It has up to 2.5 dBi of gain. The antenna has an adhesive mount for ease of installation. It has 4 meters (13 ft) of RG-174 cable attached.
This signal amplifying unit will boost cell network of all Canadian Carriers including Bell Mobility, Rogers Wireless, Telus Mobility, Freedom Mobile, and Sasktel.
Cel-Fi GO M can be installed by persons who are comfortable running cabling and doing simple car maintenance. You might however consider asking a friend, finding a local electronics installer/ handyman, or an auto repair/ detailing shop to install it for you. Are you installing in a vehicle that will stay stationary for a while, such as a recreational vehicle (RV)?
If you are not moving, you can switch the GO-M to stationary mode on the Cel-Fi WAVE app to use up to 100 dB of gain and coverage up to 12,000 sq ft. The coverage will depend on the antenna isolation, antenna choice, and mode it is set to. You can always use a panel antenna inside to direct the signal towards a specific direction to increase the coverage bubble or even use two antennas one inside and one outside when you are stationary.
The more separation between the antennas, the larger the coverage bubble.
Below is one example.
Please call us if you have any questions.
|Supported Phones.||Cell Phones, Hotspots, and any Device that uses Cellular Data.|
|Output power.||Maximum UL power 20-22dBm EIRP, Maximum DL power 10dBm per 5 MHz EIRP.|
|Power supply.||In-Car Charger Included.|
|Connector type.||SMA Female.|
Alternate part names:
- cel-fi go
- celfi go
- cell-fi go
- cellfi go
- cel-fi gom
- celfi gom
- cell-fi gom
- cellfi gom
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.