In-Vehicle Server Patch Antenna (50 Ohm) + 18 inch Cable w/SMA Male Connector
In-Vehicle Server Patch Antenna (50 Ohm) + 18 inch Cable w/SMA Male Connector
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: A41-V30-120
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Cel-Fi Mobile Server Patch Antenna (In-Vehicle Interior Antenna) with 18 inches cable is a vehicle cellular / LTE antenna that creates inside coverage area, optimized for Cel-Fi GO car, truck, RV cell phone signal booster kits. The Cel-Fi Mobile Server Antenna (50 Ohm) has an adhesive mount for ease of installation.
In addition to CelFi Go signal boosters, it works for any brand automotive cell phone booster kit including SureCall, HiBoost, weBoost / Wilson Electronics, etc. This Nextivity Cel-Fi GO-M indoor mobile broadcast antenna has a black eighteen inches cable terminating in a SMA male connector. CelFi SKU #: 591NA41200C60V40. Model # is A41-V30-120 / A41V30-120 / A41-V30120 / A41V30120.
Summary: Nextivity Cel-Fi GO-M Indoor Mobile Server Antenna - Adhesive - Black 18 inch Cable - LTE (SMA).
Features:
- Wide-band (698 to 2690 MHz) - 2G, 3G, 4G, LTE.
- Omni-directional antenna can receive signals from all directions.
- Up to 2.5 dBi Gain.
- For all 50 Ohm input impedance signal amplifier kits.
- SMA-Male connector.
- Includes 3M brand low-loss high-performance 18 inch cable.
Specifications:
| Frequency Range | 698-960 / 1710-2690 MHz |
|---|---|
| Bandwidth | 90 / 170 MHz |
| Input Impedance | 50 Ohms |
| Gain | 2.5 dBi |
| Polarization | Vertical |
| VSWR | ≤ 2.0 |
| Max. Power | 50 W |
| Cable Type | RG-174 |
| Connector Type | SMA MALE |
| Mounting Type | 3M Adhesive |
| Dimension | 4 x 22 x 115 mm |
| Cable length | 4 meters |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
