Lightning Surge Protector (50 Ohm) - SMA-Male to SMA-Female
Lightning Surge Protector (50 Ohm) - SMA-Male to SMA-Female
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: AFCLC06SMSFC7
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Protect your 50 Ohm SMA-equipped cell phone signal boosters and GPS equipment with premium quality Lightning Surge Protector (50 Ohm) with SMA-Male to SMA-Female connectors. Lightning Protector with SMA connectors operates over the DC-6 GHz frequency range. This unit is ideal for protecting SMA-equipped cell phone amplifiers (50 Ohm) and GPS devices.
This is our premium signal booster custom class 7 inventory item with UPC 697691010694. This device operates at a wide band and high power capability making it suitable for HAM Radio, 2.4GHz WiFi networks, GMRS, 2-Way Radio, GPS and numerous other applications.
The unit features coaxial SMA Female to SMA Female Bulkhead coaxial connectors and can be panel mounted. Its gas discharge tube shunts electrical transients and surges to ground, thus protecting sensitive equipment. Standard coaxial SMA-Male to SMA-Female Bulkhead coax connectors are used.
Features.
- Gas Tube Element can be replaced.
- DC-6 GHz Broad Bandwidth.
- Capable of handling High Surge Power.
- Thru-Hole Mounting.
- DC Passing for Powering Amplifiers Remotely.
- Low VSWR and Loss.
Applications.
- VHF, UHF, LMR, GPS.
- Wireless Video Systems.
- 3G/4G LTE, PCS, Cellular Repeater.
- Outdoor Antenna Feedlines and Tower Installs.
- Amateur Radio.
Specifications:
Frequency Range | DC-6 GHz |
---|---|
VSWR | 1:1.2 typical |
Insertion Loss | 0.4dB Typical |
Impedance | 50 Ohm |
Gas Tube DC Breakdown Voltage | 230V+/-20% |
Gas Tube Impulse Breakdown Voltage | 1000V 20% |
Gas Tube Insulation Resistance | 2000 MegOhm min |
Rated Surge Current | 20 KA max |
Connectors | SMA-Male to SMA-Female Bulkhead |
Dimensions | 1.9 x 1.3 x 0.9 Inches (48 x 33 x 23 mm) |
Max. Panel Thickness (Bulkhead Connector) | 0.12 Inches (3.17 mm) |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products