LMR600 75 Ohm Coaxial Cable, 1/2" Thick, 1 Ft. (Choose Qty. Based on # of Ft.)

LMR600 75 Ohm Coaxial Cable, 1/2" Thick, 1 Ft. (Choose Qty. Based on # of Ft.)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: LMR60075AFC
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Times Microwave LMR600 75 Ohm Coaxial Cable by the foot. It is half an inch thick and sold per foot. It offers lower loss than RG11 cables. It uses LMR600-75 connectors only. This is a SignalBooster.com premium quality cable that must be purchased by the foot. It boasts least attenuation and highest stability.
Please Note: This half an inch thick coaxial cable is available in bulk and is priced per foot because it is sold by the foot. Therefore, after adding this item to cart, please update "quantity" in shopping cart based upon number of feet required.
Technical Specifications:
Manufacturer | Times Microwave Systems |
---|---|
Shield % | Foil Tape & 85% braid |
Nominal O.D. | 0.59 inch |
Dielectric Insulation | FEP |
Nominal Core O.D. | 0.455 |
VOP | 87% |
Center Conductor Diameter | 0.108 inch |
Center Conductor Construction | Solid |
Center Conductor Material | Copper Clad Aluminum |
Loss @ 50 Mhz | 0.5 dB |
Loss @ 100 MHz | 0.6 dB |
Loss @ 900 MHz | 2.3 dB |
Loss @ 400 MHz | 1.5 dB |
Loss @ 1000 MHz | 2.5 dB |
Cable Type | LMR-600-75 |
Nominal Capacitance (pF/ft) | 15.6 |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Please check outside signal level in decibels before ordering. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
If it is too weak, submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.

Related Products