LMR-600 Plenum Cable, Red, 1/2" Thick, 1 Ft. (Choose Qty. Based on # of Ft.)
LMR-600 Plenum Cable, Red, 1/2" Thick, 1 Ft. (Choose Qty. Based on # of Ft.)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: LMR600LLPXAFC
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
LMR-600 Plenum Cable is Times Microwave 1/2 inch 50 Ohm coax cable that is sold by the foot. Order exact custom length cable that you need. It features a Red CATV-P plenum rated jack. UL/NEC & CSA rating of "CMP" and "FT6".
This coaxial cable by foot has a stranded outer conductor with a copper-clad aluminum center conductor. The plenum-rated cable by the foot has a bending radius of 1.5 inches. Maximum frequency capacity is 9.3 GHz.
The Times Microwave LMR600 1/2 inch red plenum-rated 50 Ohm coax cable is available in bulk and is priced per foot. The new LLPX has an extended temp range (-40C to 125C), higher power handling, advanced chemical and UV resistance, and compliance of a red jacket for public safety and in-building applications.
This is a SignalBooster.com premium quality cable that must be purchased by the foot. It boasts least attenuation and highest stability.
Please Note: This half an inch thick coaxial cable is available in bulk and is priced per foot because it is sold by the foot. Therefore, after adding this item to cart, please update "quantity" in shopping cart based upon number of feet required.
Technical Specifications:
| Dielectric Insulation | PE |
|---|---|
| Manufacturer | Times Microwave Systems |
| Cable Type | LMR-600-LLPX |
| VOP | 76% |
| Center Conductor Diameter | .150 inch |
| Center Conductor Construction | Solid |
| Center Conductor Material | Copper Clad Aluminum |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
