Low PIM Hybrid Coupler 698-2700 MHz (Microlab CA-J06)
Low PIM Hybrid Coupler 698-2700 MHz (Microlab CA-J06)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: CA-J06
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
RF signal distribution tap summary: Low PIM Hybrid Coupler 698-2700 MHz (Microlab CA-J06). Microlab Models CA-J06 & J07, are based on catalog model CA-84N. This 4 port Hybrid Coupler is designed to meet the special needs of Verizon Wireless, with 30 dB of isolation and passive intermodulation (PIM) guaranteed to be less than -153 dBc. It is commonly used to combine two wireless carriers with powers up to 80W, in the band to a single antenna feed. The CA-J07 model differs only in that it is painted to ensure performance in an outdoor IP67 environment. Available with 7/16 DIN connectors. Catalog CA-84 series is also available with 4.1-9.5 DIN "Mini-DIN" connectors as model CA-84C. RoHS Compliant. RoHS stands for Restriction of Hazardous Substances. RoHS restricts the use of specific hazardous materials found in electrical and electronic products (known as EEE). UPC: 729198024727. SKU: CAJ06.
Features.
- Standard Bandwidth for commercial wireless applications.
- Guaranteed Low PIM.
- 30dB Port to Port Isolation.
- Models for Outdoor Environments.
- Low VSWR and Dissipative Loss.
- Rail Standard EN 50155:2007 (Class T1) Certified.
- High Reliability, Moisture sealed.
- Easy mounting to pole or wall.
What is low PIM?
PIM stands for Passive Inter-Modulation. Its unit of measurement is Decibel (dB). In essence, its meaning is, "unwanted signals generated by non-linear mixing of 2 or more frequencies". Therefore, "high PIM" results in weaker cell reception output and a limited bandwidth that supports fewer users. On other hand, "low PIM" means stronger signals with higher bandwidth to support more users simultaneously. For lower PIM, the low PIM hardware connections are designed in a precise manner for achieving near-perfect, seamless connectivity. To minimize PIM further, testing is also required to make sure low PIM hardware is installed tightly or perfectly, as intended. Read more about low PIM antennas and cable connectors.
Specifications:
| Frequency Range | 698-2700 MHz |
|---|---|
| Coupling | 3 dB nominal. |
| Maximum Power | 80W |
| Maximum VSWR | 1.20:1 |
| Isolation | >30 |
| PIM Typical | -155 dBc |
| Connectors | N-Female |
| Ingress Protection | IP67 |
| Temperature Range | -35 to 65 degrees centigrade |
| Weight | 1.6 lbs |
| Item Width | 5.2 inches |
| Item Height | 1 inch |
| Manufacturer | Microlab / FXR |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Please check outside signal level in decibels before ordering. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
If it is too weak, submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
1 Fabric Cover Panel Antenna Expansion Kit (75 Ohm) | weBoost 314440-1
1 Ft. Magnet Antenna (50 Ohm) for Vehicles (SMA-Male) + Adhesive Disk | weBoost 311125
