Wilson LPDA Antenna (311228) with Free Mounting Pole
Wilson LPDA Antenna (311228) with Free Mounting Pole
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 311228+901117
Need similarly powerful exterior 50 Ohm directional antenna with up to 26 dBi Gain option? For extremely weak signal areas, consider unidirectional RF-Boost High Power Long Range Antenna to replace any 50 Ohm Yagi / LPDA or Omni antenna within your signal enhancing system. It is ultra wide-band and ultra directional parabolic metal grid antenna. It requires precise directional focusing using signal meter for max. add'l Gain of up to +26 dB.
- Questions & Answers
- Make An Offer
New high-gain wide-band LPDA antenna (Wilson 311228) has been designed and manufactured by Wilson Electronics / weBoost. It has been made specifically for WilsonPro commercial enterprise cell phone signal booster models Wilson Pro 1100 50 Ohm (460147 / 460147F), 1300 (460149 / 460149F), 1300r (460150 / 460150F), 4300 (460152 / 460152F) and 4300r (460153 / 460153F) that we carry in-stock under Wilson Pro Amplifiers category.
It is a high gain exterior antenna that anyone can use to improve their existing 50 Ohm cellular amplifier kit's performance by catching maximum signal from outside when antenna is pointed to the nearest cell tower.
Donor antenna works for all 50 Ohm amplifier kits.
Although it was designed for Wilson Enterprise Grade wireless amplifying kits, it can work exceptionally well for any other Wilson Pro model such as the Pro 70 line, and weBoost, or other brand cellular amplifiers. Compatible with worldwide cellular bands, this high-gain 50 Ohm LPDA antenna has N-Female connector. It works for all cellular platforms including LTE, CDMA, GSM, UMTS, and AWS. It works for all brand cell amplifiers that have 50 Ohm outside antenna port.
The purchase includes all mounting hardware plus FREE mounting pole. It has a two-year manufacturer’s warranty. Designed to handle the toughest weather conditions, this antenna delivers superior performance when paired with WilsonPro commercial-grade amplifiers.
It has a rugged, all-weather construction. It offers a tilt-swivel bracket. It is designed to fit 1.5 inch to 2 inches diameter pipe, or mast on exterior of any building. This High-Gain LPDA Antenna can be adjusted easily to point in the direction of nearby cell towers.
Notable Properties of this High-Gain LPDA Antenna:
- This high-gain LPDA antenna works effectively on LTE, AWS, UMTS, GSM, and CDMA cell bands.
- The 44-inch directional antenna is completely waterproof and suitable for all types of weather.
- Cellular signal is optimized by directly aiming the antenna at nearby cell towers.
- A tilt-swivel bracket is used to ensure simple yet accurate adjustment.
Features of the LPDA (log-periodic dipole array) Antenna:
- The LPDA antenna for WilsonPro commercial-grade amplifiers works effectively for voice and data on all worldwide cellular bands, like LTE, AWS, CDMA, UMTS, and GSM.
- This is a high-grade antenna, designed specifically for WilsonPro commercial-grade cellular boosters (repeaters).
- Of rugged design, this antenna is waterproof and suitable for all types of weather situations.
- Installation is simple, and the kit comes with a tilt-swivel bracket for precise adjustments.
- Tilt-swivel bracket supports a 1.5 inch to 2 inch diameter mast (pipe).
- This LPDA antenna comes with a 2 years manufacturer warranty.
|Model Number | UPC:||311228 | 810005961639|
|Supported Carriers:||All USA Carriers|
|Frequency Bands:||698-806, 806-960, 1710-1880, 1900-2200, 2200-2700|
|Peak Gain (dBi):||12.0, 12.0, 12.9, 13.1, 11.2|
|Half-Power Azimuth Beamwidth (Degrees):||60, 60, 38, 46, 44|
|Half-Power Elevation Beamwidth (Degrees):||46, 42, 30, 34, 34|
|Maximum Power (W):||50|
|Antenna weight (pounds):||3.5|
|Rated Wind Velocity (miles per hour):||130|
|Pole Mount (inches):||1.5-2.0 / 3.8-5.0|
|Designed for:||Wilson Pro Signal Boosters|
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.