4G Marine Cell Phone Signal Antenna w/ 20 ft. RG58 cable
4G Marine Cell Phone Signal Antenna w/ 20 ft. RG58 cable
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 304420
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Marine Antenna | weBoost 304420 by Wilson Electronics.
4G marine cell phone signal antenna by weBoost is a wide-band omni-directional antenna. Purchase includes 20 feet of RG-58 cable with N-Male to SMA-Male connections. It covers 698-960 MHz and 1710-2700 MHz frequencies. UPC: 811815026327.
Features:
- High-performance, omni-directional antenna.
- Threaded ferrule/post for side or bottom cable exit.
- Weather resistant.
- Built-in ground plane.
- 20 feet RG58 cable included.
- For mobile or fixed locations.
- Easy installation.
Specifications:
| Frequency | Gain | 700-800 MHz | 3.4 dB, 824-894 MHz | 4.1 dB, 880-960 MHz | 3.5 dB, 1710-1880 MHz | 3.1 dB, 1850-1990 MHz | 5.1 dB, 2110-2170 MHz | 0.2 dB. |
|---|---|
| Polarization | Vertical |
| Impedance | 50 Ohms |
| Radiation Pattern | Omni-Directional |
| Gain | 4 dBi |
| Lightning Protection | DC Ground |
| Polarization | Vertical |
| Horizontal Beamwidth | 360 degrees |
| Vertical Beamwidth | 60 degrees |
| VSWR | < 1.8 |
| Maximum Input Power | 100 Watts |
| Connector Type | SMA Male |
| Mounting | Standard marine mount: 1 inch x 14 inches thread |
| Dimensions | 2.5 inches x 9.8 inches / 63 mm x 250 mm |
| Color | White |
| Radome Material | PVC UV Resistant |
| Reflector Material | Copper |
| Rated Wind Velocity | 130 mph / 210 kph |
| Operating Temp | -40 degrees C to 65 degrees C |
| Humidity | 100% |
| Cable | 20 ft., White RG-58, N-male to SMA-male |
| RoHS | Compliant |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
