Mobile Mark Surface Mount Antenna w/3 ft. RG58 cable + SMA Male connector
Mobile Mark Surface Mount Antenna w/3 ft. RG58 cable + SMA Male connector
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: RM-WLF-1C-BLK-36
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Made in USA by Mobile Mark, Inc., this Surface Mount Antenna offers Peak Gain of 3dBi at 694-894 MHz and 5dBi at 1.7-2.7 GHz (1700-2700 MHz). This purchase from SignalBooster.com includes 3 ft. RG-58 cable with SMA Male connector for most vehicle cell phone signal booster applications. It covers the most popular frequency bands 694-960 and 1700-2700 MHz.
Clearance sale: Save money today on this rugged surface mount black antenna housed in ABS radome. Buy multiple quantities and get free shipping on order total of $100+.
Perfectly suited for heavy-duty and other types of industrial applications, this antenna allows is constructed from black ABS plastic. It boasts an operational temperature between -40 degrees Celsius and 85 degrees Celsius. This unique antenna can be utilized in both fixed and remote locations. Fixed locations can include data transfer centers, for remote monitoring, and even from moving fleet vehicles including car, pick-up truck, mini-van, bus, mini-bus and SUV.
Specifications:
| Frequency: | 694-960 MHz, 1700-2700 MHz. |
|---|---|
| Gain: | Peak 3 dBi at 694-894 MHz and 5 dBi at 1.7-2.7 GHz (1700-2700 MHz). |
| VSWR: | 2:1. |
| Radome Material: | Black ABS Plastic. |
| Impedance: | 50 Ohm Nominal. |
| Maximum Power: | 35 Watts. |
| RF Connector: | SMA Male. |
| Weight: | 6.5 Oz. / 184 Gm. |
| Mounting: | 5/8 Diameter (15.8 mm) feed thru, 1 inch lg (25.4mm) thread up to 1/4 inch (6.35mm) thk. metal. |
| Antenna Size/Mount: | 1.75 inches Diameter x 3 inches Height x .63”= inch Hole (Diameter 45 mm x Height 76 mm, 16 mm Hole). |
| Stud Depth: | Mount to 1/2 inch metal (12.7 mm). |
| Hardware Supplied: | Stud Mount Locknut and Gasket. |
| Operating Temperature: | -40 Degrees to +85 Degrees Celcius. |
| Shock & Vibration: | EN 61373, IEEE 1478, MIL. |
| Dust/Water Ingress: | IP67. |
| Coax Cable Type: | RG58 Cable. |
| Cable Length: | 3 Feet. |
| Mobile Antenna Mount Type: | Permanent. |
| Antenna Material: | Plastic. |
| Color: | Black. |
| GPS Included: | No. |
| RoHS: | Compliant. |
| Manufacturer: | Mobile Mark, Inc. |
| Manufacturer Part Number: | RM-WLF-1C-BLK-36. Alternate Supplier Tessco PN/SKU: 591621. |
| UPC: | 729198976194. |
Radiation Patterns:
From the manufacturer:
This RM-WLF is a rugged wireless LTE surface mount antenna. It is for industrial or other wireless LTE heavy duty applications.
This RMWLF LTE Antenna is for applications such as remote monitoring from fixed locations or data transfer from a moving vehicle. This broadband antenna covers more frequencies than traditional dual band mobile antennas.
This RM WLF 4G antenna can also be used with a ceiling mount hardware which converts the antenna into a wide-band ceiling mount antenna for multiple cellular applications.
These applications include: wireless LTE at 700 MHz, HSPA at 850 MHz, AWS at 1.7 & 2.1 GHz, as well as 5G-ready & LTE at 2.5-2.7 GHz.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
