Outdoor MIMO Panel Antenna for WiFi & Cell 3G 4G LTE
Outdoor MIMO Panel Antenna for WiFi & Cell 3G 4G LTE
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: ANT-129-001AFC
- Questions & Answers
- Make An Offer
Premium Quality Outdoor MIMO Panel Antenna for WiFi & Cell 3G 4G LTE can be used as a DAS sector antenna or cellular booster at outdoor and indoor venues with a high capacity. It consists of two independent cross-polarized antennas in a single enclosure.
MIMO stands for "multiple-in and multiple-out" and DAS stands for "distributed antenna system". This is our premium signal booster custom style # 4 inventory item: 50 Ohm dual polarized MIMO sector panel antenna for DAS cellular 2G, 3G, 4G, LTE with UPC 697691010540 & internal SKU AFCAS0727G10B65M2-NF.
This High Performance Ceiling Antenna provides high gain dual polarity coverage for 2G, 3G, 4G, LTE and 2.4 GHz WiFi frequency bands of 698 to 960 & 1710 to 2700 MHz. This professional antenna consists of two independent cross-polarized antennas in a single enclosure.
It's 65 degree wide main beam makes it suitable as an outdoor directional antenna for MIMO Cellular modems that have dual external antenna connections including the Verizon Jetpack 4G LTE Hotspot AC791L, Netgear Aircard 791S and 791L. The MIMO link can operate at the maximum data rate due to the cross-beam dual polarization of the antenna.
- +/- 45 Degrees Dual Slant Polarization.
- Bandwidth - 698-2700 MHz.
- Operates in any weather.
- Beam width - 65 Degrees.
- Rugged N-Female Connectors.
- Adjustable Tilt - Up or Down.
- 3G, 4G and LTE Cellular Applications.
- 2.4GHz WiFi 802.11b/g/n.
- DAS Systems in Public Venues and Stadiums.
- Micro and Small Cell Sector Coverage.
- Verizon Jetpack 4G LTE Hotspot AC791L.
- MIMO 4G LTE USB Modems.
- Netgear Aircard 791S and 791L.
|Frequency Range||698 to 960 / 1710 to 2700 MHz|
|Polarization||+ / - 45 Degrees|
|Horizontal Beamwidth||65 Degrees|
|Vertical Beamwidth||65 Degrees|
|F/B Ratio||≥ 15 dB|
|Isolation||≥ 25 dB|
|Connector||2 x N Female|
|Maximum Power||100 Watts|
|Dimensions||11.5 X 7 X 2.5 (Inches)|
|Temperature Range||-40°F to 149°F (-40°C to 60°C)|
|Weight||0.95 Lbs. (0.43 Kg)|
|Mast Diameter||1.2 - 2.0 Inches (30-50 mm)|
|Lightning Protection||DC Short|
Questions & Answers
QUESTIONS & ANSWERSAsk a Question
This MIMO panel antenna part number ANT-129-001AFC has 2X N Female, so my question is 50 Watts + 50 Watts or also it is possible 100 Watts with one N Female?
For this reference MIMO antenna, the total input power should not exceed 50W (so 25W + 25W). Which device you plan to use with this antenna? Know that the FCC limits consumer class cellular radios to a maximum of 1 W and most WiFi radios are under 10W. Thank you.
What is the range?
It can attract signal from up to 10 miles away.
How does this mount?
There's a bracket which you would use to attach a U bolt to a pole.
Does this antenna take full advantage of LTE-A?
Yes, it does.
Will this work for T-Mobile? I know they use 700 mhz and higher. Although they are also about to use 600 mhz. I would be using it with a high end 4G-LTE mimo hot spot.
This will for work for the 700 MHz bands but not 600 MHz at this time.
Does this Outdoor MIMO Panel Antenna for WiFi and Cell 3G 4G LTE need a ground plane?
The groundplane is included in the antenna.
Will this work with AT&T? I'm looking to buy a Netgear LB1120 router to use as my internet at home. Thanks!
Yes, this MIMO antenna does cover AT&T for 4G and 4GLTE.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.