SmoothTalker Mobile CX6 (6 Band w/ 30 or 23 dB Gain) w/ Universal Non-Charging Holder & 3 in. Magnet Antenna
SmoothTalker Mobile CX6 (6 Band w/ 30 or 23 dB Gain) w/ Universal Non-Charging Holder & 3 in. Magnet Antenna
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: BTUX623MinUA
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Smooth-Talker Mobile CX6 Cell Phone Signal Booster provides 30 Decibels Gain (Canada version) or 23 dB Gain (USA version). It is a complete kit with Universal Non-Charging Holder and 3" Magnetic Antenna (Part # SmoothTalker BTX630MinUA or BTUX623MinUA, respectively).
It is an Extreme Power 6-Band Cradle/ Coupling Booster. This is the new 6-band version of the previous SmoothTalker CX1 or Mobile X Dual Band amp. kit. It boosts and improves 3G, 4G, and LTE voice & data reception signals on 6 bands for all networks in USA & Canada! Please select appropriate version from options menu, depending upon your shipping address in USA or Canada.
It is self-regulating and therefore requires no extra maintenance. It can connect to cellular towers from 10 mi. (15 km.) to up to 35 mi. (60 km.) away. Therefore, they are suitable for driving to remote locations that are up to 60 kilometers (35 miles) from the nearest cell tower. Industry Canada IC ISED Approved, and Certified by FCC.
SmoothTalker BTX630MinUA or BTUX623MinUA Car or Truck Cell Phone Booster Kit Includes:
- Mobile CX6 30dB or 23dB 6-Band 3G 4G LTE Extreme Power Cellular Booster. SKU: BTX630XAA or BTUX623XAA, respectively.
- Install Mount Universal Phone or Cellular Hotspot Holder with Antenna Connector. SKU: HUN1A.
- 12V Vehicle Socket Power Supply. SKU: DCH6CSW.
- Booster Input Cable 3 feet or 100 cm. MCT Female to FME Female. SKU: ACX100X.
- 3” general purpose magnetic mount antenna with MCT female connector at end of 10 feet cable. SKU: SEMiniX1.
Features:
- Easy to install.
- Complete booster kit - Includes all parts required.
- Single user, single device boosting kit.
- Boosts RX and TX network signals.
- Extends cellular coverage 10 miles to 35 miles.
- Improves device battery life.
- Reduction in dropped calls & clear wireless phone voice calls.
- Up to 30 times increased data speed for mobile internet/ email/ texting.
- FCC Approved.
- Made in North America.
- Premium quality, precision craftsmanship.
Covers Six Frequency Bands:
- 700MHz, Band 12.
- 700MHz, Band 17.
- 700MHz, Band 13.
- 800MHz, Band 5.
- 900MHz, Band 2/25.
- 2100MHz, Band 4.
This 2G, 3G, 4G, LTE cell phone amplifier kit covers the following mobile wireless frequency bands: Bands 12 & 17 (Lower 700 MHz), Band 13 (Upper 700 MHz), Band 5 (850 MHz), Bands 2 & 25 (1900 MHz), Band 4 (AWS 1700/ 2100 MHz).
Note: All USA & Canadian frequencies are supported (USA Carriers AT&T Wireless, Verizon, T-Mobile, Sprint, etc., and Canadian Carriers Bell Canada, Telus Mobility, Rogers Wireless, Freedom Mobile, etc.) except Sprint bands 26 (lower 800 MHz) and band 41 (2500 MHz) which may be used in very few areas in USA. If you have Sprint wireless service, please check with Sprint to ensure they do not use the two specific frequencies as stated above, within your area. If they do, this six band in-truck or in-car cell phone signal amplifier kit will unfortunately not work for you.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
