TNC Adapter (N Female to TNC Male Connector)
TNC Adapter (N Female to TNC Male Connector)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: NF-TM-AFC
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
TNC Adapter (N-Female to TNC-Male Connector). This N Female Jack to TNC Male Plug Adapter helps change connector style to the required one. Connector adapters like these convert or change an existing connector's termination into a different termination type. Interface dimensions are conformable to the standard, IEC 60169-16. The nut is brass metal that is nickel plated. The gaskets are made of silicone rubber.
The TNC (Threaded Neill–Concelman) connector is a threaded version of the BNC (Bayonet Neill Concelman) connector. TNC is sometimes erroneously called as Threaded Navy Connector or TN connector. BNC is sometimes erroneously called British Naval Connector, Bayonet Nut Connector, or BN connector.
The body is made of brass with trimetal plating on it. It has a PTFE insulator. The center contact is made of bronze, and is silver plated. This is a 50 Ohm impedance connector for 50Ohm cables. Voltage Standing Wave Ratio (VSWR) which also referred to, as Standing Wave Ratio (SWR) is less than 1.13. The dielectric withstanding voltage is 1500 volts. Insulation resistance is greater than 5000 MilliOhm. Center contact resistance is less than 1.5 MΩ (Milli-Ohm). Outer contact resistance is less than 0.4MΩ (Milliohm). The weight of this is 0.13 lb. or 0.06 kg. UPC: 729198281724.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Please check outside signal level in decibels before ordering. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
If it is too weak, submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
