Cel-Fi MIMO Panel Antenna with QMA Male Connectors
Cel-Fi MIMO Panel Antenna with QMA Male Connectors
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: A52-X12-100
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
MIMO Panel Antenna for Cel-Fi Quatra is a dual-polarization LTE MIMO antenna for pole, ceiling, or wall mount installations, with a gain of between 6.5 and 9 dBi. The MIMO Panel Antenna is used for off-air installation of multiple CUs. Item title: Nextivity Cel-Fi QUATRA Wideband MIMO Antenna. Model number: A52-X12-100 / A52X12-100 / A52-X12100 / A52X12100.
Cel-Fi MIMO Panel Antenna is integrated with the Cel-Fi WAVE Platform via Cel-Fi's AntennaBoost. This antenna with QMA male connectors can connect to any MIMO-enabled CU or NU with quick connect (QMA) cables. This antenna can be rotated in 45-degree steps for best performance with the 8-position dial base. This process is managed with real-time data from the Cel-Fi WAVE Platform Antenna Position Test function.
Features:
- MIMO (LTE).
- Dual polarization (vertical/ horizontal) design.
- QMA quick-release connector.
- Wideband coverage (700 – 2700 MHz).
- Low VSWR.
- Aesthetically pleasing, low profile housing.
Compatibility.
| Carrier | Services |
|---|---|
| Verizon | 2G/3G Voice + Data 4G LTE |
| AT&T | 2G/3G Voice + Data 4G LTE |
| Sprint | 2G/3G Voice + Data 4G LTE |
| T-Mobile | 2G/3G Voice + Data 4G LTE |
Specifications.
| Dimensions | 237.5 x 229.5 x 50 mm |
|---|---|
| Frequency | 698-716 / 728-746 / 746-757 / 776-787 / 824-849 / 869-894 / 1850-1910 / 1930-1990 / 1910-1915 / 1990-1995 / 1710-1755 / 2110-2155 |
| Gain | 6.5 - 9 dBi |
| Impedance | 50 ohm |
| Connector type | 2 x QMA Right Angle Male with 2m Coax Cable |
This Cel-Fi MIMO Panel Antenna part # is A52-X12-100 or A52X12100. Item name is: 591NA52260807X12. Item summary is: Nextivity Cel-Fi QUATRA Indoor/ Outdoor Wideband MIMO Panel Antenna - Pole/Bracket Mount - White 2m Cable - 2 LTE (QMA M).
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
My hotspot has Tc9 connectors. Will these connectors work? Also, what is the length of the cable?
Our Cel-Fi wideband MIMO panel antenna is equipped with QMA Male (angled) connectors. These are not compatible with TC9 connectors. If your hotspot supports external antennas, you might need to use adapters. As far as the cable length on the antennas, they are both 2 meters long.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
