Cel-Fi GO RED Portable Emergency FirstNet Coverage Signal Booster
Cel-Fi GO RED Portable Emergency FirstNet Coverage Signal Booster
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: MMMPDH000005
- Questions & Answers
- Make An Offer
Cel-Fi Go Red MPA (Mobile Portable Amplifier) is a portable emergency FirstNet signal booster kit. Each kit can boost FirstNet coverage for emergency communications over up to 15,000 sq. ft. This smart cellular amplifier is lightweight, rugged, and portable. It provides up to 100 dB Gain from a single Carrier in stationary mode. It supports FirstNet bands 12 as well as 14 without interference to other cellular devices or WiFi.
With its ease of use, portability and rugged design, this closed case solution offers FirstNet subscribers a practical solution for enhancing cellular coverage in both fixed and portable applications. It delivers up to 100 dB gain which is up to 1000 times greater than other coverage extending solutions on the market.
It can be transported easily by air in an airplane, or in vehicles to strengthen first responder radio connectivity for planned events or emergency response situations. It features Nextivity's Cel-Fi Go Red amplifier and a magnet mount antenna that can be mounted on any surface.
It enables vital two way radio communications on FirstNet network radios used by police, firefighters, and other first responders. It helps keep one or more users connected simultaneously in areas where mobile signal is weak. The NEMA 4 rated carry case is weather resistant and can withstand harsh conditions including exposure to dust and water.
It enables end-users to access and push or pull mobile data and voice connectivity in fringe network coverage areas or in-building spaces where coverage does not reach. Portable magnet mount stubby donor antenna, the slim low profile paddle server antenna, and multiple power connectivity options make it easy to set-up system quickly in any time-sensitive emergency scenario or space.
Both antennas have SMA connectors with 50 Ohm impedance. This is Nextivity CelFi GO Red public safety signal amplifier placed within a portable kit similar to a Pelican case. The GO Red MPA is not meant to be used in a vehicle while moving, but rather as a portable solution for a quick deployment to enhance AT&T FirstNet coverage in a convenient deployable kit.
- Boosts FirstNet Bands 12 & 14 up to 100 dB Max Gain.
- 4G/LTE Voice and Data.
- Up to 15,000 Sq. Ft. Coverage.
- Indoor / Outdoor NEMA 4 Rated.
|Case Material:||Lightweight NK-7 resin|
|Exterior Case Dimensions (LxWxH):||15.8" x 12.1" x 6.8"|
|Airline Compatibility:||Carry-on = YES | Checked Bag = YES|
|Rated Output Power:||Uplink: 24 dBm | Downlink: 16 dBm|
|Frequency:||Band 12: Downlink (DL) Frequency 729 MHz, 746 MHz | Uplink (UL) Frequency 699 MHz, 716 MHz
Band 14: Downlink (DL) Frequency 758 MHz, 768 MHz | Uplink (UL) Frequency 788 MHz, 798 MHz
|Power:||12V, 2A current draw, 16W nominal power consumption.|
|Environmental:||Operating temperature: 0° to 65° C
Relative humidity: 0% to 95%, non-condensing
RoHS 2 (European and China compliant)
Surface Temperature at any point (30° ambient): 53° C
|Installation:||Per user guide provided with purchase. Compatible with Cel-Fi App on Android and iOS smartphones for installation and monitoring.*|
|Antenna Ports:||SMA Connectors|
|Antenna Impedance (Donor and Server):||50 Ohm (both Donor Antenna input, and Server Antenna output)|
|Physical Specifications:||GO Red Amplifier: 96.5mm x 43.25mm x 272.5mm, 850g|
|DC Power Plug and Jack:||NEMA 4 rated power plugs and jack.|
|Compliance:||3GPP TS 25.143 Rel.10, 3GPP TS 36.143 Rel.10, FCC Part 15 and 90, Bluetooth BQB, CE (check individual product version for specifics).|
|System Management (Software)||Supports Cel-Fi WAVE App. Status (List and Map), Settings, Commissioning, Reporting, Diagnostics, Alarms & Notifications, Software Updates.|
*The Free Cel-Fi WAVE App will communicate with your Cel-Fi GO RED MPA via Bluetooth and can be used to:
- Register and Monitor your Signal Booster.
- Update Software.
- Configure Hardware Features.
Cel-Fi Go Red Portable Public Safety Signal Booster Kit Contents Video:
Questions & Answers
QUESTIONS & ANSWERSAsk a Question
How many AT&T FirstNet connected devices can be connected to this system at the same time?
There's no limit to the number of devices that can benefit simultaneously within the range of up to 5 feet from server antenna.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.