Public Safety NEMA 4 Annunciator Panel for BDA DAS
Public Safety NEMA 4 Annunciator Panel for BDA DAS
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: AP8000BAFC
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Public Safety NEMA 4 Annunciator Panel for BDA DAS is a universal BBU Annunciator. It is a micro-processor controlled fire alarm annunciator panel (AP-8000B) for use with In-building 2-Way Emergency Radio Communication Enhancement System (ERCES). It is required by the National Fire Protection Agency (NFPA 1221). It works with all 12V, 24V, 48V and 110V Battery Back-up systems. Operating temperature range -4 to +122 Degrees Fahrenheit.
This Annunciator Panel is designed to meet NFPA 1221 standards for a dedicated BDA and BDA battery back-up annunciation panel. Contained in a compact NEMA 4 enclosure, its audible and visual alarm annunciator is a companion to the PE Series power enclosures and features eight Form-C alarm relays. The first five alarms are wired for NFPA mandated alarms; AC Power Failure, Low Battery, Charger Failure, BDA Failure and Antenna Failure. Three alarm relays are available for site customization. Additional alarms could include Donor Antenna Disconnection, Active, RF Emitting Device Malfunction, System Component Malfunction, and more. A normal AC power LED and lamp test button are included.
Features:
- NEMA 4 enclosure, powder coated steel.
- Front panel "test" alarm button.
- Ultra bright light emitting diodes.
- Microprocessor controlled.
- Wide operating voltage range: 12, 24 and 48 volt systems.
- Eight (8) Form-C alarm relays.
- Alarm silence button (24 Hrs.) located inside enclosure.
- Easily adapted to fit nearly any situation - 12, 24 and 48V DC battery back-ups.
Specifications:
| Input | 7 - 60V DC. |
|---|---|
| Input Current Draw | <100 mA. |
| Max. Power | 4.5 watts. |
| Operating Temperature | -4 to 122 Degrees F (-20 to 50 Degrees Centigrade). |
| Heat Dissipation | < 12 watts (worst case). |
| Relay Switching Current | 2-Amp DC (resistive). |
| Enclosure | NEMA-4, UL listed, welded steel with IP-66 rating, quarter turn latch, bonding studs on door and enclosure, continuous stainless steel hinge with welded brackets for enclosure mounting. |
| Enclosure Size including Mounting Flanges (H x W x D) | 11.375 inches x 8 inches x 4.75 inches. |
| Weight | 7.35 lbs. |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
