Public Safety DAS Annunciator and Monitoring Panel System
Public Safety DAS Annunciator and Monitoring Panel System
Pay Over Time with PayPal Credit
No Payments + No Interest if paid in full in 6 months. For US customers. Choose PayPal at checkout for details. Pay later with
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
NFPA-72 and NFPA-1221 Public Safety DAS Annunciator System ensures our client's Fire Inspection Readiness. The annunciator system is used by our in-building public safety radio signal enhancement system installers. It provides FORM-C dry relay contacts to provide alarm signaling with any fire alarm installation. The system will operate with DAS installations that include multiple amplifiers, antennas and power source, and includes circuitry to detect communications faults (open or short circuits) with the DAS equipment. This Public Safety DAS Annunciator and Monitoring Panel System model 1221B is perfectly suited for SureCall Guardian 3 QR Bi-Directional Signal Amplifier System.
Annunciator System Backup Battery.
Shipped with an 9 hr. rechargeable SLA battery that mounts inside the enclosure to provide 24 hours of backup power.
Annunciator Power Supply.
Shipped with an external wall mounted power supply that can be connected to any 120 VAC outlet. Optionally, it can be ordered so that it can be powered from either 48 VDC or 24 VDC sources (user supplied). This enables powering from the same DC supply used by the DAS equipment or the Master Fire Alarm Panel in the building. The maximum current consumption is 200 milliamps.
Annunciator System Power Supply and Charger.
Shipped with an external 12 VDC power supply and battery charger that can be connected to any 120 VAC power outlet. The battery charger includes indicators that show the health of the panel’s backup battery.
This system meets NFPA-72 (2010, 2013 & 2016) and current NFPA-1221 codes for a Dedicated Annunciator and Monitoring Panel.
It displays Status of:
- Donor Antenna.
- AC Power.
- Battery Capacity.
- Battery Charger.
- System Status.
- Includes Form-C relay contacts to interface with any fire alarm system.
- Monitors communications link for integrity.
- NEMA-4 Enclosure.
- Includes independent circuitry to check antenna, AC power, battery capacity, charger and overall system status.
- Mates with or augments monitoring of any BDA, antenna, charger, battery or UPS.
- Low cost, easy to install and program.
- Small size NEMA-4: 10”H x 8”W x 4”D.
- Backed up by internal battery (included)
- Easy installation to optional primary power sources: 48 VDC or 24 VDC, or 120 VAC.
- Commercial Buildings, Convention Centers.
- Industrial Factories and Manufacturing Plants.
- Government Establishments and Facilities.
- Hospitality Industry Hotels and Motels.
- Education - Schools, Colleges, Universities.
The current edition of the NFPA 1221 fire code (shown below) and NFPA-72 (2010, 2013 & 2016) describe the requirements for monitoring the performance of Public Safety in-building two-way Radio Enhancement Systems with a dedicated panel. This panel is required to be located in the fire command center but some jurisdictions require that it be located in the same room as the Radio Enhancement System. These panels are designed to meet all these requirements.
Fault Signaling Relays.
Some DAS components are not configured with appropriate Form-C alarm relays that can interface properly with all Fire Alarm Systems. This unit provides these alarm relays. They can be programmed to mate with any Fire Alarm System with their "normally OFF" or "normally ON" states for any "fail safe" convention that is required by the Fire Alarm System.
Enclosure & Power Requirements.
The enclosure is NEMA-4 rated consistent with the other requirements of the code and a small backup battery (included) inside the panel provides over 24 hours of service if this is needed to supplement loss of primary power. Primary power is provided by an AC socket-mounted 15 VDC power supply (included).
Per code, fault detection cables between the Radio Enhancement System and the panel are monitored to detect open circuits or short circuits to ground. If this condition is detected the panel will trigger a fault alarm to the Fire Alarm System signaling the loss of communications integrity.
This panel provides an economical easy-to-install solution to meeting the code requirements and the flexibility to interface with and augment, if required, the fault detection and alarm signaling capabilities of a large variety of standard components used in these systems. The small size and light-weight enclosure can be wall-mounted into any installation.
WE INSTALL. Please submit installation quote questionnaire for a quote if you require professional installation and assistance with consent and approval process for Public Safety Distributed Antenna System (active DAS) or Public Safety Bi-Directional Amplifier System (passive BDA).
Excerpted from NFPA 1221 (2016 Edition):
Similar requirements in NFPA-72 (2010, 2013, 2016).
Standard for Installation, Maintenance, and Use of Emergency Services Communications System.
220.127.116.11 Dedicated Panel.
(1) A dedicated monitoring panel shall be provided within the fire command center to annunciate the status of all RF emitting devices and system component locations. The monitoring panel shall provide visual and labeled indications of the following for each system component and RF emitting device:
(a) Normal ac power
(b) Loss of normal ac power
(c) Battery charger failure
(d) Low battery capacity (to 70 percent depletion) (e) Donor antenna malfunction
(f) Active RF emitting device malfunction
(g) System component malfunction
(2) The communications link between the dedicated monitoring panel and the two-way radio communications enhancement system must be monitored for integrity.
|Dimensions||10” x 8” x 4”|
|Form C Dry Relay Outputs to Fire Alarm System||AC Power, System (Summary Alarm), Amplifier (BDA), Antenna, Battery Charger, Battery Capacity, Communications Fault.|
|Fault inputs from Radio Enhancement System||Donor Antenna (OK / Fail), Amplifier (OK / Fail), Charger (OK / Fail), Battery Capacity (OK / Low), AC Power (ON / OFF)|
|Analog Inputs||Donor Antenna Sense, DAS Battery +/-|
|Certifications||UL: E194432, ETL: 4001276|
|Power||120 VAC (and optional 48V DC or 24V DC) 200 ma max|
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Signal Booster for Wi-Fi, HDTV, 3G 4G LTE Cellular up to 80,000 ft² (SureCall Force7)
SureCall 4G Force5 Industrial Signal Booster for 80,000 Ft²
SureCall 4G Force5 Inline Industrial Booster for 80,000 Ft²