Pulse Larsen Public Safety Antenna PSIBVU78 (In-Building)
Pulse Larsen Public Safety Antenna PSIBVU78 (In-Building)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: PSIBVU78
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Public Safety Antenna 132-174, 380-570, 700-960 MHz (In-Building):
In-Building Public Safety Bands Antenna with 1.5 feet of cable and Type N-Female RF connectors. It is used by our installers when providing public safety DAS installation service.
Brand: Pulse Larsen. Part Number: PSIBVU78. Series: V-Thinity V/H/7/8. UPC: 646444281409.
Public Safety Distributed Antenna System (DAS) Antenna Provides Wide Bandwidth VHF, UHF, 7/800:
- 132-174 MHz
- 380-570 MHz
- 700-960 MHz
Aesthetically pleasing flat antenna design for indoor ceilings:
Only 1.5mm (0.060 inch) thickness to ceiling for unobtrusive flushed appearance matching any decor.
VSWR < 2:1, optimized to low frequency inside building environments.
For Many Applications:
- In-Building Repeater Systems, Bi-Directional Amplifiers.
- Police, Fire, Government critical communication enhancement.
- Low-profile ceiling mounting.
- Enhanced for In-building applications providing modest Gain, multi-floor coverage, and helps avoid nulls of traditional dipoles.
Electrical Specifications:
| Frequency: | 132 thru 174 / 380 thru 570 / 700 thru 960 MHz. |
|---|---|
| Nominal Impedance: | 50 Ohm. |
| VSWR: | 2:1 with antenna mounted against ceiling tile with 2 ft. x 2 ft. metal suspension frame. |
| Polarization: | Vertical. |
| Power Withstand: | 6 Watts. |
| Connector Type: | N Female. |
| Cable Type: | Ø 4mm / 0.16 inches. |
| Cable length: | 500mm / 19.7 inches. |
Mechanical Specifications:
| Color: | White. |
|---|---|
| Weight: | 675 grams. |
| Cable retention: Pull off | 30 N. |
| Fixing system: | 4 pieces M6 hex slot bolt and nut. |
Environmental Specifications:
| Operating temperature: | 0 thru 60 degrees celsius. |
|---|---|
| Storage temperature: | MIL STD 801G: 24h at 85C and 24h at -40C. |
| Temperature shock: | MIL STD 810G: Method 503.5, -40 for 1 hr to +85 C for 1 hour at 15 degrees celsius / min rate of change; 3 cycles. |
| Humidity: | MIL STD 810G: 24h at 60C and 95%RH. |
| Vibration: | MIL STD 810G: 514.6 C-II. |
| Chemical resistance: | MIL STD 810G. |
| Drop test: | Top, bottom, side. 3 times/ orientation, 40 inches. |
| Package drop: | All faces & corners, 40 inches. |
*All specifications subject to change as deemed appropriate by manufacturer to improve functionality or other features.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
