zBoost 75 Ohm Wide-Band Directional Window-Mount Antenna | CANT-0043
zBoost 75 Ohm Wide-Band Directional Window-Mount Antenna | CANT-0043
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: CANT-0043
Looking for a complete cell phone signal booster kit? Call 1-855-846-2654 for expert recommendation or try our super easy-to-use Product Selection Tool to help find the perfect cell phone signal booster kit for home/office or car/truck to solve weak signal strength problem.
- Questions & Answers
- Make An Offer
Wideband Directional Window Mount Cell Phone Signal Antenna provides 6 dBi Gain on LTE & Cellular band frequencies and 7.5 dBi Gain on AWS & PCS band frequencies.
zBoost CANT0043 is a window-mounted high gain antenna supporting both 3G and 4G cellular communications on the CEL, PCS, AWS, and LTE frequency bands. It uses a type F-female connector and supports RG6 and RG11 coaxial cables. A wall/ mast mounting bracket is also included for applications where sufficient signal is not present at a window interior. This antenna provides increased signal coverage when aimed in the direction of best signal. It must be wall mounted with the cable pointing down. Avoid pointing the antenna within 2 feet of other wires or metal objects.
Purchase includes: Antenna, cable with F type connector, short and long suction cup attachments, as well as a wall/mast mounting bracket kit for flexible mounting options.
Wi-Ex zBoost external antenna provides increased coverage for all cellular bands (700 MHz - 2600 MHz) from a single direction.
- Outdoor, window mount wide-band unidirectional antenna.
- Fixed easy installations.
- Weather resistant.
- Up to +7.5 dBi Gain.
zBoost CANT-0043 wide-band indoor/outdoor receiving signal antenna provides improved signal for devices operating in the cellular, PCS, AWS, and LTE frequency bands. For maximum performance, be sure to aim the antenna in the direction of your wireless provider’s cell tower. If you know the direction of your provider’s tower, simply point the antenna in that direction. If you are unsure of the location of the nearest tower, see antenna aiming instructions below. Note: The closest tower to your location may not be for your specific provider.
FIRST: Place the signal antenna on the interior of a window located in the area of best signal.
Determine the location that provides the strongest signal using the signal strength indicator on your cell phone. Find the location on the window that provides the most bars of signal strength.
Note: Energy-efficient windows will likely block signal from reaching the signal antenna. In this case, it is necessary to move the signal antenna away from this window to another location.
Before proceeding, make sure that the intended surface is clean and clear of any dust. Then, using the suction cup attachments, fasten the signal antenna to your window making sure to point the correct face of the antenna to the tower as indicated on the label. In order to capture the strongest signal, you may do one or all of the following:
1. Move the antenna around the window – higher is usually better.
2. Use the long suction cup attachments as provided to better angle the antenna to capture the best signal. The antenna must be vertical on the window (as pictured in the illustration to the right, with cable at the bottom – not on the side). Avoid draping the coax near the antenna.
3. Keep the signal antenna at least 2 feet from any metal.
4. The signal antenna and indoor antenna should have at least 15 feet of horizontal separation. Increasing separation of the 2 antennas will optimize zBoost performance.
Flexible Mounting Options:
Mounting option 2: Mount the signal antenna to an interior or exterior wall by first placing the wall/mast bracket on the desired wall using screws and wall anchors (not provided). Unscrew and remove the endcaps from the top and bottom of the antenna and place the antenna inside the bracket so that the cable hangs down and then snap into place. Fasten the endcaps back into place.
Note: Avoid placing the signal antenna near metal such as wiring, a window edge frame, A/C unit, metal siding, etc.
Mounting option 3: Install a mast (not provided) on your roof in the area of best signal. Keep in mind, the antenna will need to face the direction of your carrier’s nearest tower. Fasten the wall/mast bracket to the mast using the provided hardware as seen above. Unscrew and remove the endcaps from the top and bottom of the antenna and place the antenna inside the bracket so that the cable hangs down and snap into place. Fasten the endcaps back into place.
SECOND: Connect coax cable to the antenna.
THIRD: Route the cable indoors and connect it to the base unit using the cell phone signal booster installation instructions.
zBoost Panel Window/Pole Mount Directional Antenna CANT-0043 Specifications:
Frequency: 704 - 894 MHz & 1710 - 2155 MHz.
Gain: 6 dBi Average & 7.5 dBi Average, Respectively.
Beamwidth: 76 Degrees & 54 Degrees, Respectively.
Connector: Type F female.
Impedance: 75 Ohms.
Dimensions: 6.0 x 6.5 x 1.8 inches.
The FCC requires that this panel antenna has a minimum horizontal separation of 6 feet (2 meters) from other CMRS (commercial mobile radio service) devices.
zBoost CANT-0043 wide band antenna is a window-mounted high gain antenna supporting both 3G and 4G cellular communications on the CEL, PCS, AWS, and LTE frequency bands. It is a window-mounted signal antenna with an F-female connector and supports RG-6 and RG-11 coaxial cable. A wall/mast mounting bracket is also included for applications where sufficient signal is not present at a window interior.
This antenna provides increased signal coverage when aimed in the direction of best signal. The included F to TNC adaptor connects the antenna to the base unit using 15 ft. of RG-6 coax cable (part # YX030-15W). This antenna must be wall mounted with the cable pointing down. Avoid pointing the antenna within 2 feet of other wires or metal objects. Includes: Antenna, cable with F type connector, short and long suction cup attachments, as well as, a wall/mast mounting bracket kit for flexible mounting options.
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.