An item you're pre-ordering is on backorder so it will take few days to ship - are you sure you want to proceed to order it?
Close1900 MHz Yagi Antenna (50 Ohm, SureCall SC-230-1900)
1900 MHz Yagi Antenna (50 Ohm, SureCall SC-230-1900)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-230-1900
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
- Warning
Description
Product Description
2G and 3G 1900 MHz Single Band Yagi Antenna. It works with 50 Ohm systems. It is an outdoor directional antenna. Part number SureCall SC-230-1900/ Cellphone-Mate CM-230-1900. It provides antenna reception Gain of 14 dB on 1850 MHz to 1990 MHz frequency band. It has a Type N-Female connector.
Sure-Call SC2301900/ Cellphone-Mate CM2301900 purchase includes mounting kit as well. The Yagi is a directional antenna that is designed to be used in areas of weak cellular signal. It is aimed directly at a cellular tower to provide the maximum connectivity. It is weather resistant. It is easy to install. Once up and running, the Yagi gives you faster data speed, and improved cellular signal.
With an impedance of 50 Ohm, the antenna is a high gain type, best for outdoors. Point it towards the cellular tower that is not only unobstructed but also the nearest. Do point it to the cell tower that belongs to the Carrier whose signals need to be boosted. Alternate part numbers: SureCall SC230-1900/ Cellphone-Mate CM230-1900. UPC: 896831002210.
From the manufacturer:
Summary:
- Outside use.
- Directional.
- 14 dB Gain.
- 2G, 3G.
- Single Band @ 1900 Mhz.
- Easy to install.
Overview:
These directional Yagi antennas are the best performing antennas on the market today. They are high gain outdoor antennas that should be pointed toward the nearest cellular tower. This antenna is designed to cover 2G and 3G systems for PCS frequency range. This single band antenna is designed to work with similar one band in-building amplifiers for PCS band that spans frequency 1850 MHz to 1990 MHz. This low profile antenna is an external directional Yagi antenna commonly used with our 1900 MHz in-building amplifiers. It works with all networks operating at 1900 MHz frequency.
SureCall SC-230-1900 Specifications.
Frequency. | 1850 - 1990 MHz. |
---|---|
Input Impedance. | 50 ohm. |
Antenna Gain. | 14 dB. |
Beamwidth. | E:72 H:5/ E:76 H:5. |
VSWR. | ≤1.5. |
Polarization Type. | Vertical or horizontal. |
Radiation. | Directional. |
Maximum Power. | 100 Watts. |
Connector type. | N Female or based on customized. |
Height (inches). | 27.72 in. |
Diameter. | N/A. |
Weight. | N/A. |
Mount. | Mounts on pole with .5” to 1.5” diameter. |
Cable Length. | 10.24”. |
Operating Temperature. | -40°F to +140°F. |
Color. | White. |
Rated Wind Velocity. | 133 miles per hour. |
Lightning Protection. | DC Ground. |
Number of Elements. | 14. |
SureCall SC-230-1900 Set Up Instructions.
CellphoneMate CM230-1900 MHz Yagi Antenna is a directional antenna. Directional antennas need to be pointed toward the nearest cellular tower for the best results. CellPhone Mate CM230-1900MHz Yagi Antenna includes mounting equipment to attach to a pole .5 inch to 1.5 inch in diameter (pole not included).
- Place a U-bolt around the pole and through the two holes at the top and of the antenna plate.
- Place a flat washer, a lock washer and a hex nut on each of the bolt ends.
- Using an adjustable wrench or 1/2" wrench, tighten the nuts.
- Place the second U-bolt around the pole and through the two holes at the bottom of the shelter.
- Put a flat washer, a lock washer, and a hex nut on each bolt end, and tighten the hex nuts so that the Yagi remains in place, but can still be adjusted.
- Rotate the Yagi so that is points to the desired station/repeater/receiver.
- Tighten the hex nuts so that the Yagi is firmly attached.
- Place the omni antenna a distance above the Yagi antenna, providing space between the mounted antennas. Ideally, omni antenna should be mounted flush with the very top of the pole, so that the pole does not interfere with the antenna’s communication.
- While holding the omni antenna against the pole, place a U-bolt around the pole and through the two holes at the top and of the antenna plate.
- Place a flat washer, a lock washer and a hex nut on each of the bolt ends.
11. Using an adjustable wrench or 1/2" wrench, tighten the nuts.
12. Place the second U-bolt around the pole and through the two holes at the bottom of the shelter.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
This 1900 MHz Yagi Antenna listing indicates it is sold out... any replacements?
Sorry, only wide-band LPDA multi-element antennas available at much higher cost. Manufacturers are not too inclined anymore to produce antennas that cover only a single band 1900 MHz PCS frequency.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products