AC Power Supply Adapter (850030) for weBoost Home Complete / Installed
AC Power Supply Adapter (850030) for weBoost Home Complete / Installed
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 850030
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
AC Power Supply Adapter (850030) for weBoost Home Complete / Installed is updated version of previous model 850023. It is designed to power weBoost Home Complete (470145) cell phone signal booster kit using a standard indoor wall 110 volts electrical power jack or power outlet.
The same kit is used in weBoost Installed and thus this power supply is compatible with weBoost Installed (474445) as well. This replacement power supply is also compatible with Wilson Pro 1100 (WilsonPro 460147 and 461147).
Specs.: AC/DC 110/240VAC 50/60Hz to 12V/3A with 12 ft. cable. 36W Switching Kycon Plug with Cable (Black) for use with the Home Complete (470145). 2.5 x 5.5 x 11 mm Plug Jack. UPC: 697691024578.
Please note that you may receive part # 850030 or the previous version part # 850023 with minor changes that do not affect its operation - both work the same. This is an original weBoost / Wilson-Pro branded authentic power supply unit manufactured by Wilson Electronics, LLC.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
I need a DC power cord for cigarette lighter in vehicle for weBoost Home Complete (470145) model.
Unfortunately we do not have any other power supplies tested and available for that unit because weBoost Home Complete (470145) is intended for use in-building where there's 110V electrical power socket. However, you can try a power inverter (we do not guarantee it will work) if you wish to use in vehicle with DC 12V power source but also note that the booster model 470145 must only be used when vehicle is stationary or parked. Due to higher Gain than allowed in moving vehicles, that stationary-use certified signal booster is not allowed per FCC regulations for use in moving vehicles.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products