Yagi Antenna (Full Band, 50 Ohm, SureCall SC-230W)
Yagi Antenna (Full Band, 50 Ohm, SureCall SC-230W)
No Payments + No Interest if paid in full within 6-12 months. Choose Klarna's buy now, pay later option at checkout for these details and other low interest financing options. Learn more.
Free Lifetime Support. SKU / Model: SC-230W
Need more powerful exterior 50 Ohm directional antenna with up to 26 dBi Gain option? For extremely weak signal areas, consider unidirectional RF-Boost High Power Long Range Antenna to replace any 50 Ohm Yagi / LPDA or Omni antenna within your signal enhancing system. It is ultra wide-band and ultra directional parabolic metal grid antenna. It requires precise directional focusing using signal meter for max. add'l Gain of up to +26 dB.
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
Full band Yagi Directional Antenna SureCall SC-230W operates on 50 Ohm systems. It is also more accurately called a log-periodic dipole array or LPDA antenna because it covers a wider frequency spectrum than traditional Yagi antennas.
Sure-Call SC230W provides antenna reception Gain of 10 dBi on 698 MHz to 960 MHz frequency and 11 dBi on 1710 MHz to 2700 MHz frequency. Consider 3G, 4G, 5G Yagi antenna that covers from 617 MHz (5G Sub-6 Frequencies).
This Sure Call SC230-W Yagi is a directional antenna that is designed to be used in areas of weak cellular signal. It is aimed directly at a cellular tower to provide the maximum connectivity. This SureCall antenna covers 2G, 3G, 4G LTE and WLAN systems, for full data coverage and access. It is weather resistant. It is easy to install. Once up and running, the Yagi gives you faster data speed, and improved cellular signal.
Wide band directional Yagi antenna is arguably one of the best antennas in terms of performance out there. With an impedance of 50 Ohm, this SureCall antenna is a high gain type, best for outdoors. Point SureCall Yagi antenna towards the cellular tower that is not only unobstructed but also the nearest. Do point it to the cell tower that belongs to the Carrier whose signals need to be boosted. This 3G and 4G antenna is created with the ability to cover diverse systems for the LTE, AWS, PCS and Cellular such as WLAN, 4G, 3G and 2G. Alternate part numbers: Cellphone-Mate CM-230W/ CM230W. UPC: 896831002876.
From the manufacturer:
- Outside use.
- 10 dB Gain.
- 2G, 3G, 4G, WLAN.
- Full Band.
- Easy to install.
These directional Yagi antennas are two of the best performing antennas on the market today. They are high gain outdoor antennas that should be pointed toward the nearest cellular tower. The 4G antenna is designed to cover 2G/ 3G/ 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. The wide band or full band antenna is designed to work with similar wideband or fullband in-building amplifiers for AWS, Cellular, and PCS bands. Purchase includes antenna and pigtail cable as shown in image. No other parts included.>
SureCall SC-230W Specifications.
|Input Impedance.||50 ohm.|
|Beamwidth.||E50 H85/E60 H85/E50 H60.|
|Connector type.||N-Female or customized.|
|Cable type.||SC400 or SC240 recommended.|
|Mount.||Mount on the roof.|
|Operating Temperature.||-22°F to +176°F.|
|Dimensions.||17.3” x 8” x 1.45”.|
Sure-Call SC-230W Set Up & Installation Instructions.
Cellphone-Mate CM-230W Yagi antenna is a directional antenna. Directional antennas need to be pointed toward the nearest cellular tower for the best results. SureCall CM230W Yagi antenna includes mounting equipment to attach to a pole, 0.5 inch - 1.5 inch in diameter (pole not included).
1. Install U-bolt on pole.
2. Slide pipe clamp over U-Bolt, flat side away from pipe.
3. Slide antenna bracket onto U-Bolt in desired location.
4. Install flat washer, split lock washer and nut, tighten as appropriate.
Questions & Answers
QUESTIONS & ANSWERSAsk a Question
I have a Pepwave BR1 Mini router with T-Mobile SIM card installed...will the Yagi full band 50ohm SC-230W be compatible with my router?
Yes it will for your cellular antenna port, but this antenna has a short pigtail with N-Female connector so you would first need a coax cable with N-Male connector on one end and SMA-Male connector on other (whichever length you need to reach your modem or router and match connector on your router).
I ordered full band directional antenna and did receive it, but it doesn't have the mounting bracket that it is supposed to have. I would like to find out how to get that bracket. Thanks.
Thank you for your inquiry. Sorry, as evident by the image at the product listing, the Yagi antenna you ordered only comes with a pigtail attached to it which ends in a cable connector. It is intended for switching out with your existing omni antenna or replace the one you have that may be damaged by lightning, etc. Antenna itself when purchased on its own does not come with installation bracket for mounting on pole, wall, or edge of roof. Such a bracket, if needed, must be purchased separately. It seems what you're looking for, is listed here: https://www.signalbooster.com/products/pole-mounting-assembly-hardware-surecall-sc-mount-pole
I have a Netgear Blackhawk mobile hotspot unit and need the antenna and cord to improve my signal. Would you please get me the info on the correct cord and antenna so I can order?
You would be able to use this very powerful long range directional antenna with the system. Here is the link so you can see the details if reading this in email response we're sending you:
You would need a run of cable to connect to this antenna. We have one at 30 ft. that you could use. Here is a link for that:
There will be a couple of adapters you need.
This is the first:
And here is the final connector:
Please contact us if you have any questions regarding the set up.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles of your home / building. Please check outside signal level in decibels before ordering. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
If it is too weak, submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
1000' Plenum Cable (Fire Rated) SureCall SC400 Coaxial (Orange Color One Thousand Feet Coax)
500' Plenum Cable (Fire Rated) SureCall SC400 Coaxial (Orange Color Five Hundred Feet Coax)
1000 ft. Black SureCall 600 Coax Cable (Ultra Low Loss SC600)