In-Building 3 Panel Antennae Coverage Extension Kit (50 Ohm)
In-Building 3 Panel Antennae Coverage Extension Kit (50 Ohm)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 309908-50N
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
3 Wall Panel Antennae Expansion Kit (50 Ohm) | 309908-50N (previously 309905-50N) weBoost / Wilson Pro.
This in-building 50 Ohms triple Panel antenna expansion kit (30990850N, previously 30990550N) contains three wall mount indoor panel antennas with mounting hardware (311135), three lengths of 60 ft. of black color Wilson 400 cables with type n-male to n-male connectors (952360), one 50 ohm four way splitter (859981), and one black colored 2 ft. jumper cable type Wilson400 (952302).
Buy three additional antennas kit with required cables and splitter to connect to your existing cellphone signal booster kit - 50 Ohm Interior 3 Panel Antennas Expansion Kit with Cables and Splitter. UPC: 811815026075.
Wilson Pro 309908-50N 50 Ohm three panel antennas extension kit is excellent for expanding indoor coverage for your existing cell phone signal booster system. Place these indoor antennas inside your home or office in a room, space, or area where cellular reception is still weak and needs improvement. Then connect the longer cables provided along with your existing cable to the splitter. Then use the short jumper cable provided to connect the splitter to your mobile amplifier or repeater.
Please note that this kit is for amplifiers on 50 Ohms impedance so please confirm this on your booster device or check its user guide/manual to confirm. If you have a 75 Ohms cellular amplifier, simply check and choose from our 75 Ohms antenna expansion kits section.
weBoost 309908-50N is manufactured by Wilson Electronics for its weBoost and WilsonPro line of cell phone signal boosters. However, this antenna kit option can work with any other brand 50 Ohm cellular amplifier system as well.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Please check outside signal level in decibels before ordering. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
If it is too weak, submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
In-Building 1 Panel Antenna Coverage Extension Kit (50 Ohm)
50 Ohm Interior 1 Panel Antenna Expansion Kit with Cables & Splitter
