SmoothTalker Stationary RV Z6 for Parked RVs (60 dB)
SmoothTalker Stationary RV Z6 for Parked RVs (60 dB)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: BMUZ660OXLPH20
- Questions & Answers
- Make An Offer
Smooth-Talker RV Z6 Park cell signal booster (SmoothTalker BMUZ660OXLPH20) with sleek low profile outside omni antenna. It is designed for temporary installation in recreational vehicles (RVs). Unlike RV permanently installed cell phone boosters, this kit can only be used when RV is parked because it provides 60 dB Gain which exceeds minimum threshold of signal gain allowed (50 dB) in moving RVs.
This SmoothTalker RV Z6 kit offers higher output power worldwide for both TX and RX transmissions / uplink (UL) and downlink (DL) wireless transfers than other competing brand products. Best quality and performance - Made in Canada. Designed, assembled, manufactured in Canada. Buy Canadian.
Details of parts included.
Mobile Z6 Park 60dB 6-Band 3G 4G LTE Extreme Power Wireless Booster. Part Model Number: BBCZ660XAA.
Patch Inside Antenna with 7 Ft. Cable:
Seven feet low profile patch antenna is a server antenna that packs a powerful punch broadcasting signal throughout any recreational vehicle (RV). It has MCT female connector that connects to the cellular amplifier main unit. Part Model Number: SRP1XL.
Omni High Gain Outside Antenna:
Low profile omnidirectional high gain exterior antenna has highest resistance thanks to its low profile. It is best to prevent breakage due to extreme weather, high winds, tree branches, or whatever it has to endure during your rides and drives across the country or remote areas. Worry not about catching signals because this little antenna packs a powerful punch by sucking in signals from cell towers located up to 35 miles (60 kilometers) from the nearest cell tower. Mounting includes stainless steel brackets, screws, and double sided tape. It comes with 20 ft. quad shield low loss cable and MCT female connector. Part Model Number: HGO.
120V Wall Power Supply:
120 volts electrical power supply typically found on walls of RV makes it convenient to power up the booster. It has input of 100-240 Volts and output of 6 Volts. The current rating is 3 amps. Part Model Number: DCH6HV.
20 Ft. Coaxial Cable:
20ft. quad shield C205 coax cable with MCT Male to MCT Female connectors. This C-205 cable connects outside sleek blade antenna to the cellular amp. base unit placed inside RV. It is a low loss cable which is all weather outdoor rated. It has .205 inch diameter. It has solid copper center conductor. It has two layers copper braid and two layers of aluminum foil shielding. It has factory pre-installed and crimped weather proof connectors. Part Model Number: CBXMAXFE20.
Complete cell phone signal booster kit includes everything required to fully install in your car or truck. After installation, take advantage of strong boosted cellphone signal strength for constant wireless connectivity and safety. Certified by FCC.
- Highest power and gain wireless multi-user RV cell phone signal booster available.
- Improves 3G voice calls and increases 4G LTE data speed for all wireless devices.
- Self regulating. Easy to install. No maintenance required.
- Rugged cast aluminum housing for durability & reliability.
- Connects to wireless networks up to 35 miles (60 kilometers) from the nearest cellular tower.
- Easy to Install.
- Smooth Talker Stealth Tech Technology.
- Boosts RX and TX.
- Reduces Dropped Calls.
- Improves Device Battery Life.
- Helps Multiple Users & Devices Simultaneously.
- Extends Cellular Coverage While Being Network Friendly.
- Increase Data Speeds up to 30 times.
Covers Six Frequency Bands:
- 700 MHz, Band 12.
- 700 MHz, Band 17.
- 700 MHz, Band 13.
- 800 MHz, Band 5.
- 900 MHz, Band 2/25.
- 2100 MHz, Band 4.
This 2G, 3G, 4G, LTE cell phone amplifier kit covers the following mobile wireless frequency bands: Bands 12 & 17 (Lower 700 MHz), Band 13 (Upper 700 MHz), Band 5 (850 MHz), Bands 2 & 25 (1900 MHz), Band 4 (AWS 1700/ 2100 MHz).
Note: All USA & Canadian frequencies are supported (USA Carriers AT&T Wireless, Verizon, T-Mobile, Sprint, etc., and Canadian Carriers Bell Canada, Telus Mobility, Rogers Wireless, Freedom Mobile, etc.) except Sprint bands 26 (lower 800 MHz) and band 41 (2500 MHz) which may be used in very few areas in USA. If you have Sprint wireless service, please check with Sprint to ensure they do not use the two specific frequencies as stated above, within your area. If they do, this six band in-vehicle cell phone signal amplifier kit will unfortunately not work for you.
SmoothTalker RV Cell Phone Signal Booster (Z6 Pro) Installation Diagram:
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.