SureCall Vehicle Magnet Mount Antenna (SC-200-S-F) w/ FME Connector.
SureCall Vehicle Magnet Mount Antenna (SC-200-S-F) w/ FME Connector.
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-200-S-F
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
- Warning
Description
Product Description
SureCall Vehicle Magnet Mount Antenna (SC-200-S-F) with FME Connector is a dual band magnet mount 6" short antenna.This six inches dual band magnetic mount FME connector antenna with a frequency range of 800-1900 MHz is an external antenna for use outside your vehicle. It is made of stainless steel and entirely weather-proof. Designed to be mounted on a car's roof, it is very easy to install. It draws signals omni-directionally with a 3 dBi gain. It is designed to use with SureCall's mobile amplifiers.
Sure-Call SC-200SF Vehicle Exterior Antenna Set-Up.
- Clean the vehicle roof mounting surface before placing magnet.
- Do not place magnet antenna within one and a half feet of other antennae.
- Mount antenna to surface (Place it on optimal spot and magnet will attach to it).
- Finally, attach your antenna's cable to connector of booster marked, "Outside".
SC200SF Specifications:
| Frequency | 806-924/1850-1990MHz |
|---|---|
| Input Impedance | 50 ohm |
| Antenna Gain | ≤2.0 |
| Beamwidth | 118/140 |
| VSWR | ≤2.0 |
| Polarization Type | Vertical |
| Radiation | Omni-directional |
| Maximum Power | 10 W |
| Connector type | FME Female |
| Cable type | RG174 |
| Height (inches) | Metal ground plane required |
| Diameter | 1.62” |
| Weight | 2.1 oz |
| Ground Plane | Rare earth magnet |
| Mount | Metal ground plane required |
| Operating Temperature | -22°F to +140°F |
| Color | Black |
| UPC | 896831002944 |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
Will this magnet stay on during highway speeds of 55mph?
Yes, it is designed to do so but we now have a 4 inches antenna with a wider magnet base that can withstand even higher wind speeds in storms and bad weather.
-
Can the antenna be unscrewed from the magnetic base? Or is it permanently connected?
That antenna can only be unfastened from the booster, but the cable is permanently attached to the magnetic base antenna. If you're a DIYer and want to do your own thing, you're free to do as you please, but we are not responsible for what happens afterwards. Thank you, kindly.
-
Does this plug directly into the phone and will it work with iphones?
Unfortunately due to the designs of the modern cell phones, antennas can't be adapted to the phones. You would need to use a signal booster kit to improve reception in vehicles. We have a wide array of mobile boosters here: https://www.signalbooster.com/collections/vehicle
Data Sheet / User Guide
Data Sheet
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
