Vehicle Magnet Antenna, 12 in., Wideband 698-2700 MHz
Vehicle Magnet Antenna, 12 in., Wideband 698-2700 MHz
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-200W
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
SureCall Vehicle Antenna SC-200W is twelve inches tall. It is a magnet mount antenna. It features wide band coverage from 698 MHz to 2700 MHz. Part number is Sure-Call SC-200W/ Cellphone-Mate CM-200W. It is an external antenna for use outside your vehicle.
It is made of stainless steel and entirely weather-proof. Designed to be mounted on a car's roof, it is very easy to install. It draws signals omni-directionally with a 5 dBi gain. It is designed to use with SureCall's mobile amplifiers. Alternate part #'s: SC200W/ CM200W. UPC: 896831002685.
If you have a truck, SUV or any other type of vehicle you will find the Sure Call SC-200-W wide band magnetic mount antenna an ideal choice. This twelve inches magnetically mounted wide band mobile antenna must be installed vertically to draw signals from all directions. It has an FME-Female connector type. Therefore, it is designed to use with SureCall's mobile amplifiers that have type FME Male Connector for their exterior antenna port (this antenna has attached cable that terminates in type FME Female connector).
It is 2.6 oz in weight with an impedance of 50 Ohm. Carriers supported include T-Mobile, Verizon, AT &T and Sprint. It covers carrier service platforms like 4G LTE, 2G Voice, 4G HSPA+ and 3G Data.
This is a long 12" antenna to enhance the signal of a vehicle such as a big rig, a RV or an ordinary automobile. It is highly portable so you can also move it from one automobile to the next. Magnetic mount antenna with FME connector is suitable for personal autos, larger trucks and RVs.
Sure-Call SC-200W Vehicle Exterior Antenna Set-Up.
- Clean the vehicle roof mounting surface before placing magnet.
- Do not place magnet antenna within one and a half feet of other antennae.
- Mount antenna to surface (Place it on optimal spot and magnet will attach to it).
- Finally, attach your antenna's cable to connector of booster marked, "Outside".
The SC-200W is an omni-directional antenna. These external magnetic mount antennas are made of stainless steel and is fully weather-proof. Designed to be mounted on the roof of a car, truck or RV and to be used with SureCall signal boosters for vehicles Omni directional antennas gather cell signals from all sides and do not need to be pointed towards a cellular tower. Can locate signal from a cell tower as far as 35 miles away.
- Designed for use with our 50 Ohm vehicle signal boosters.
- Omni-directional antenna – does not need to be pointed toward the cellular tower.
- 5 dBi Gain.
- Dual Band and Wide Band Options.
- Easy to install.
- Portable and magnetic mount – easily transferable.
For best results, this antenna should be mounted in an upright position. SC-200W wide-band magnetic mount antenna uses a rare earth magnet mount. It is portable and improves the signal on any vehicle with a steel exterior. Ideal for automobiles, semi-trucks, and RV’s and it can easily be moved from one vehicle to another.
Product Specifications of SC-200W (2G — 4G).
|Frequency||698 - 960 / 1710 - 2700 MHz|
|Supported Carriers||All North American|
|Input Impedance||50 ohm|
|Connector type||FME – Female|
|Operating Temperature.||-22 Degrees Fahrenheit to +176 Degrees Fahrenheit|
|Diameter at base||1.45 inch|
|Height||12.9 inch (exact)|
|Power Rating||25 Watts|
|Ground Plane||Metal ground plane required|
|Included Coaxial Cable Type & Length||RG178 and 10 feet|
|Material||Whip - Stainless Steel|
Questions & Answers
QUESTIONS & ANSWERSAsk a Question
I suppose I did not pay close enough attention when ordering this antenna. I have ordered a replacement before and just took for granted that the fittings were identical. Do you by chance have an adapter you can sell me, or do I have to send this back and order a different antenna? I just removed my Weboost from my old motorhome and planed to install it in my new one. The Drive 4GM has worked flawlessly for several years.
Sorry, this exterior vehicle antenna you have purchased (SureCall SC-200W) has FME-Female connector at its end (made for SureCall Fusion2Go 3.0, 2.0, 1.0 vehicle booster kits), whereas the weBoost Drive 4G-M kit you purchased it for has SMA-Female connector at its exterior antenna port. Therefore, you will need FME-Male to SMA-Male adapter listed at https://www.signalbooster.com/products/sma-male-to-fme-male-adapter-connector in order to make this antenna fit your cellular amplifier.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.