3G Signal Booster for all USA & Canada carriers
3G Signal Booster for all USA & Canada carriers
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 4KPR-15R
- Questions & Answers
- Make An Offer
3G cell phone signal booster for homes and offices up to 2,500 square feet. It works to boost 3G network cellular signals of all carrier networks including Verizon, AT&T, T-Mobile, Rogers, Telus and Bell.
FCC & IC approved to amplify all North American cell carriers frequencies and bands operating on 850 and 1900 MHz.
This is PowerMax personal repeater system. It is a wireless amplifier system that offers 3 Watt power and 50 dB Gain. It is ideal for condos, apartments, dorm rooms, homes and offices in a building.
This is a compact and simple solution to poor cellular reception. It provides reliable and clear cell phone communication equivalent to the cellular signal strength available outside the building.
A simple do-it-yourself installation (no tools required) allows this repeater system to be installed anywhere. The result is clean and clear voice quality with maximum data throughput on all carriers except Nextel or iDEN.
This is called a dual band cell phone booster because it enhances signals for all North American cell phones operating on 850 MHz or 1900 MHz.
What does it include?
- 3 watt dual band 50dB gain Power Max cellular repeater with built-in 9dB gain antenna (DA4000PR).
- Window mounted 9dB gain antenna (426-PW).
- Window mount for 426-PW antenna (DM426).
- 5 feet of DA240 cable with attached connectors (240-15NM).
- 10 VAC power supply (DP255).
- Application: Condominiums, apartments, homes, offices and dorm rooms (up to 500 square feet).
- Range/Performance: Wirelessly enhances signals of multiple cell phones in a room.
- Advantage: Simple do-it-yourself installation does not require tools or outside installation.
- Requirement: 10 feet separation between window antenna and repeater unit.
Captures outside signal and brings it inside where you need it:
Specifications of Repeater P/N DA4000PR.
|Uplink Frequencies:||824-849 MHz and 1850-1910 MHz.|
|Downlink Frequencies:||869-895 MHz and 1930-1990 MHz.|
|Modulations:||CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards.|
|Max Output Power:||3W (824-849 MHz), 2W (1850-1910 MHz).|
|Dynamic Variable Gain:||50dB Max (40dB repeater + 10dB antenna).|
|Power Consumption:||Standby 5 VDC/0.5A, Uplink 5 VDC/1.5A.|
|Dimensions:||10 inches length x 8 inches width x 3 inches height (254mm x 203mm x 76mm).|
|Weight:||2.5 oz (1.1 kg).|
|RF Connections:||Window Antenna Port: Mini-UHF female.|
|DC Power Connector:||Coaxial ID = 2.5 mm, OD = 5.5 mm.|
|Radiation Pattern:||Directional Beam: Horizontal 60 degrees, Vertical 55 degrees.|
Specifications of Window Antenna P/N 426-PW.
|Radio front/back:||> 20dB.|
|Bandwidth VSWR:||<1.5:1 = 810-950 and 1800-1980 MHz.|
|Max input power:||150 Watts.|
|Dimensions:||8.5inches length x 7 inches wide x 1.7 inches high (210 x 180 x 43 mm).|
|Weight:||1.5 lbs (.7kg).|
|RF Connector:||Type N female.|
|Installation:||Inside window mount or outside wall bracket (included).|
Specifications of Cable P/N 240-15NM.
|RF Connectors:||Type N male and mini-UHF male (attached).|
|Attenuation at 800 MHz:||1.06dB per 15 feet.|
|Attenuation at 1900 MHz:||1.7dB per 15 feet.|
Specifications of Power Supply P/N DP255.
|Input:||100-240 VAC 50/60 Hz.|
|Output:||5 VDC 2.5A.|
|Cord Length:||10 ft. (3 m).|
|Output Plug:||5.5 x 2.5 x 11 mm.|
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.