50 Ohm Interior 3 Panel Antennas Expansion Kit with Cables & Splitter | SureCall
50 Ohm Interior 3 Panel Antennas Expansion Kit with Cables & Splitter | SureCall
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: 3-PANEL-EXPANSION-50-OHM
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
Buy three additional antennas kit with required cables and splitter to connect to your existing cellphone signal booster kit - 50 Ohm Interior 3 Panel Antennas Expansion Kit with Cables & Splitter.
This 3 extra antennae kit for internal in-building wireless booster installation includes:
- 3 x SureCall SC-248W 50 ohm impedance wide band panel antenna for WLAN, 4G, 3G and 2G voice for AWS, Cellular, LTE and PCS frequencies spanning 698 MHz to 2700 MHz compatibility.
- 1 x SureCall SC-WS-4 50 Ohm full-band coverage 4 way splitter for LTE 700 MHz, Cellular 800 MHz, PCS 1900 MHz and AWS 2100 MHz spanning 698-2700 MHz.
- 3 x SureCall SC-001-50 Black 50 feet SureCall SC-400 coaxial cable with type N Male Connectors on both ends.
- 3 x SureCall SC-001-02 Black 2 feet SureCall SC400 coaxial cable with N-Male Connector on each end.
This 50 Ohm three panel antennas expansion kit is excellent for expanding indoor coverage for your existing cell phone signal booster system. Place these indoor antennas inside your home or office in a room, space, or area where cellular reception is still weak and needs improvement. Then connect the longer cables provided along with your existing cable to the splitter. Then use the short jumper cable provided to connect the splitter to your mobile amplifier or repeater. Please note that this kit is for amplifiers on 50 Ohms impedance so please confirm this on your booster device or check its user guide/manual to confirm. If you have a 75 Ohms cellular amplifier, simply check and choose from our 75 Ohms antenna expansion kits section.
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products