SureCall In-Building Panel Antenna 3G, 4G, 50 Ohm (SC-248W or CM-248W).
SureCall In-Building Panel Antenna 3G, 4G, 50 Ohm (SC-248W or CM-248W).
No Payments + No Interest if paid in full within 6-12 months. Choose Klarna's buy now, pay later option at checkout for these details and other low interest financing options. Learn more.
Free Lifetime Support. SKU / Model: SC-248W
If purchasing this indoor panel antenna to add to a complete cell signal booster kit, add'l parts to connect it to your boosting system are:
One Additional Panel Antenna Would Require:
- SC-WS-2: Two Way Splitter (50 Ohm 698-2800 MHz).
- 1 Cable of suitable length from: 10, 20, 30, 50, 75, 100, 500 & 1000 ft.
- SC-001-02: SC400 Jumper Cable (2 feet).
Two Additional Panel Antennas Would Require:
- SC-WS-3: Three Way Splitter (50 Ohm 698-2800 MHz).
- 2 Cables of suitable lengths from: 10, 20, 30, 50, 75, 100, 500 & 1000 ft.
- SC-001-02 (Quantity 2): Two SC400 Jumper Cables (2 feet).
Three Additional Panel Antennae Would Require:
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
SureCall In-Building Panel Antenna works on all frequencies including 3G and 4G. It is an indoor directional panel antenna. This Sure-Call part number SC-248W or CM-248W operates on 50 Ohm signal booster systems. SureCall's full band panel uni-directional antenna is unobtrusive in its design. It is for inside building use. Read SureCall SC248W technical specifications to see this is a wide-band antenna covering all frequencies from all cellular service providers in USA & Canada.
Consider future-proofing by buying the 3G, 4G, 5G version of this Panel antenna that covers from 617 MHz instead of this one that starts coverage from 698 MHz. This in-building antenna has a low profile capable of blending very easily with indoor surroundings. It has 50 ohm impedance and covers a system ranging from WLAN, 4G, 3G and 2G voice for AWS, Cellular, LTE and PCS frequencies spanning from 698 to 960 MHz and from 1700 MHz to 2700 MHz. UPC: 896831002845.
Sure Call interior antenna is best mounted on the ceiling or wall and receives and transmits within a beamwidth of 360 degrees to all cellphones. It provides a 7 dBi to 10 dBi Gain. Being uni-directional, it is easy to install thanks to the included mounting equipment. It has an F-Female connector type. SureCall full band 50 Ohm panel antenna is uniquely compact directional and made with the WLAN, 4G, 3G and 2G voice systems coverage for LTE, PCS, AWS and Cellular frequencies. The indoor high gain antenna is best for those places where a signal needs to be spread over a larger area. The high gain antenna is great for indoors and wall mounted to receive and transmit signal to cell phones with a beamwidth of 45 degrees. With a 698-2700 MHz and a 7dB to 10dB gain, the antenna comes with mounting equipment for easy and convenient installation.
This full band panel antenna is a compact directional antenna designed to cover 2G/ 3G/ 4G LTE/ WLAN systems for Cellular, PCS, AWS and LTE frequencies. It is a high gain indoor antenna suited for places where the signal needs to be broadcast over a wide area. This wall mount antenna transmits and receives to cell phones with a 45 degree beamwidth.
Range of antenna is dependent on three factors:
1) Physical obstructions.
2) Power generated by booster/ amplifier.
3) Reception from outside signal received and distributed by outside antenna.
Besides the antenna itself, the parts include mounting equipment for either a flat horizontal surface or a wall. It can be mounted on the wall to cover long passages or on ceiling to boost signal to lower floors. Alternate part numbers are: Sure-Call SC248W/ SC-248-W/ SC248-W. Cellphone-Mate CM248W/ CM-248-W/ CM248-W. UPC: 896831002845. This 5-band panel antenna is designed to integrate seamlessly with interior of your building, and receive and transmit signals to cell phones in a uni-directional fashion. This panel inside antenna is easily installed on the ceiling or wall of your building facing towards areas that needs boosted cellular reception. It includes a mounting kit. You can expect to receive a 7 to 10 db gain from the panel transmission.
SureCall SC-248W Panel Indoor Antenna Set Up.
Cellphone-Mate CM248W full-band panel antenna is a directional antenna designed to cover 2G/ 3G/ 4G and WLAN systems for Cellular, PCS, AWS and LTE frequencies. It is a high gain indoor antenna suited for places where the signal needs to be broadcast over a directed area or space. This wall mount antenna transmits and receives signal to cell phones.
- Choose location for mounting panel antenna on vertical surface. Ideal height off the floor should be the approximate height of your cellphone use.
- Using plate, mark position of desired placement with pencil or marker.
- Screw (not supplied) mounting plate into place with the slide panel protruding towards you. Provided plastic anchors are only to be used in sheetrock installation.
- Slide panel antenna securely onto mounting plate.
- Hand tighten one end of cable to inside antenna connector
- Hand tighten other end of cable to INSIDE connector of cell phone signal booster.
Note: Be sure to provide enough separation between inside and outside antenna based on dBs of signal booster provided earlier in this manual. Panel antenna should not face outside antenna, if possible.
Storage and transportation: Place in a non-extreme room temperature and dry environment. Not to be placed near fireplace or any open flame.
SureCall SC-248W Specifications.
|Input Impedance||50 ohm|
|Antenna Gain||7dB / 10 dB|
|Beamwidth||E:55 H:70/E:45 H:60|
|Connector type||N-Female with or customized|
|Ground Plane||Built in ground plane|
|Mount||Mounts to wall|
Questions & Answers
QUESTIONS & ANSWERSAsk a Question
This antenna has a Female end but I need a Male end antenna.
Correct, this antenna has pigtail cable that ends in N-Female connector. To make it end in a male connector, you can either buy any length coax cable with N-Male connectors on both ends or simply buy a N-Male to N-Male connector.
Can you mount the panel antenna on the basement Joists facing up? Will the signal go through the floor? In this case the basement ceiling joists are open.
While not ideal, it is technically feasible to do that. The floor will dampen some projected signal - but yes, partial signal will go through significantly. Usually panel antennas are mounted on the wall so there's no interference. Nevertheless, they are commonly mounted on ceiling to provide coverage downwards - and through the floor to the lower level(s). Therefore, what you're attempting to do would be somewhat similar to that and quite practical.
So I just moved to a new area and I have NO cell reception. Maybe one bar if that. I’m wondering if I buy this product will it boost my service enough to give me LTE so I can actually use my phone and place calls.
It is not likely that this antenna by itself would help solve the problem. First we need to check if you have useable signal outside. To check accurately, put your phone in field test mode because signal bars are not an accurate way to measure reception in different areas on perimeter of your building. Once you have the data (location of best signal strength in decibels outside where an antenna can be placed), you can call us to determine the best cell phone signal booster kit based on outside signal strength and square footage of area that needs coverage densification inside. Weaker the reception outside, the more powerful of a cellular amplifier kit you will require to get needed coverage inside the house/ building/ structure. Most likely, if you have decent signal at some point outside, around your house/building - One of our powerful Yagi antenna signal booster kits should provide great 4G / 4G LTE reception indoors.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles of your home / building. Please check outside signal level in decibels before ordering. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
If it is too weak, submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
Please note: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
1000' Plenum Cable (Fire Rated) SureCall SC400 Coaxial (Orange Color One Thousand Feet Coax)
500' Plenum Cable (Fire Rated) SureCall SC400 Coaxial (Orange Color Five Hundred Feet Coax)
1000 ft. Black SureCall 600 Coax Cable (Ultra Low Loss SC600)