In-Vehicle Patch Antenna 698-2700MHz SMA / N-Male Connector (SC-100W)
In-Vehicle Patch Antenna 698-2700MHz SMA / N-Male Connector (SC-100W)
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-100W
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
- Warning
Description
Product Description
SureCall SC-100W Vehicle Patch Interior Antenna with N-Male Connector connects directly to older SureCall amplifiers. It offers 3 dBi of gain and should be placed as close as possible to the cell phone. It is a wide band frequency antenna spanning frequencies from 698 MHz to 2700 MHz. Therefore, it works for all carriers in USA and Canada. United States carriers include T-Mobile, Sprint, AT&T, Verizon, and all the rest. Canadian carriers include Bell, Roger, Telus, and all the rest. It works on all wireless service platforms such as 2G Voice, 3G Data, 4G LTE and 4G HSPA+. This is the older version of newer SC-110-W/ SC-110W/ SC110-W/ SC110W.
One of SureCall's extremely lightweight and portable interior car antenna (SC100W), it is a highly convenient directional antenna you can use inside your vehicle. It is lightweight and wide-band capable of amplifying cell signals such as 3G, 4G LTE and 2G voice with older boosters from SureCall. It comes with a nine feet and 10 inches cable to provide a gain of 3 dB. This patch antenna is capable of supporting diverse users in the same vehicle in the rear and front seats. A velcro backing kind of strip is included for installation purposes. Alternate part #'s: Cellphone-Mate CM-100W/ CM-100-W.
Sure-Call SC-100-W Interior Vehicle Antenna Set-Up.
- Clean the mounting surface (can be on the side of the seat, or on the dash, etc.)
- Remove 3M backing to expose adhesive on antenna base.
- Mount antenna to side of driver's seat.
- Finally, attach your antenna's cable to connector of booster marked, "Inside".
- Note: Do not place magnet antenna within one and a half feet of other antenna or the cradle that phone is sitting in.
SC-110W Specifications.
| Frequency | 698-960/1710-2700MHz |
|---|---|
| Input Impedance | 50 ohm |
| Antenna Gain | 1-3 dBi |
| Beamwidth | N/A |
| VSWR | ≤2:0 |
| Polarization Type | Vertical |
| Radiation | Directional |
| Maximum Power | 25W |
| Connector type | Type N-Male |
| Height (inches) | 5” |
| Weight | 2 oz |
| Ground Plane | Built in ground plane |
| Mount | to interior of vehicle |
| Cable Length | 9 ft. 10 in. |
| Operating Temperature | -40 F to 176 F (-40 Celsius - 80 Celsius) |
| Color | Black |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Have a Question?
Be the first to ask a question about this.
Data Sheet / User Guide
Data Sheet
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
