N-Male / Plug Connector for LMR-200 / LMR-240 Cables
N-Male / Plug Connector for LMR-200 / LMR-240 Cables
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: CON-07-240-AFC
1(855)846-2654
Need installation quote, or help with designing a custom solution? Submit a request for quote.
- Description
- Reviews
- Questions & Answers
- Make An Offer
- Warning
Description
Product Description
This N-Male / Plug Connector is mostly used with LMR-200 / LMR-240 coaxial cables. It is weather resistant and manufactured from stainless steel to fulfill international standards.
With a signal loss of only about 0.1dB, this barrel connector is a high quality choice to use to connect to antennas, coax cables and amplifiers. It is made with steel metal composite to last many years.
This is a straight-style connector. It is compatible with all 200 and 240-type coax cables. It has 50 ohm impedance. It has N-Male connector. It requires crimping on to the cable. Here's a video showing how to crimp connectors on to cables.
Fits LMR200 & LMR240 series equivalent cables such as TWS-240 and RG8X.
Technical Specifications:
| Manufacturer | Ventev / TerraWave. |
|---|---|
| Pieces/UG | 3. |
| Material (Pin) | Brass Gold. |
| RF Impedance | 50 Ohms. |
| Max Voltage / Power | 1500V |
| For Cable | Type SC200, SC240, Wilson200, Wilson240, LMR200, LMR240. |
| Frequency Range | 0-11 GHz. |
| Strip Shield to End | 9 mm. |
| Center Pin Type | Solder. |
| Strip Jacket to End | 16 mm. |
| RF Connector Body Style | Straight. |
| Install | 392320 (1) 313429 (2). |
| Insulator Material | PTFE. |
| Strip Insulation to End | 4 mm. |
| RF Connector | N Male. |
Reviews
Questions & Answers
QUESTIONS & ANSWERS
Ask a Question-
Do you carry the N connector for the Hiboost cable? I recently purchased a 10k Hiboost booster from you and am in installation process. I have to drill a hole to bring antenna cable inside my house. The cable connector is 7/8 inch round. I really don't want to drill over 7/8 inch hole for a 3/16 inch cable. I would really like to cut the original off and replace it once in the house and drill just for the cable. Any help would be appreciated, thanks.
HiBoost 10K Smart Link, 10K Plus, and 10K Plus Pro all use type 200 cables. Therefore, this 200 series cable N-Male plug connector would fit fine.
You may also need a cable stripping tool to strip the cable first. Then you may need cable crimper tool to crimp the connector on to the cable. There's also video you can watch for a general overview on how the connectors are crimped on to coax cables:
Data Sheet / User Guide
Make An Offer
Warning
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.
Related Products
