An item you're pre-ordering is on backorder so it will take few days to ship - are you sure you want to proceed to order it?Close
Sprint Cell Phone Signal Booster for Car, Truck, RV
Sprint Cell Phone Signal Booster for Car, Truck, RV
Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.
Free Lifetime Support. SKU / Model: SC-FusionTrek-SPRINT
In-Vehicle Mobile Signal Booster, Amplifier, or Repeater Kit Made by SureCall to Boost, Amplify, Repeat Wireless Signals of Sprint Network. Enjoy clear talking and minimize missed calls.
- Certified by FCC for improving cellular reception.
- Boosts coverage for one cellular device such as cell phone or Mi-Fi.
- Carrier Agnostic - Boosts signals for Sprint plus all other carriers.
- Guaranteed to provide better cellular reception or your money back.
- Unique, first-in-industry - No exterior antenna required. Easy installation, easily transferable to another vehicle, and no loose wire on top of vehicle.
- Questions & Answers
- Data Sheet / User Guide
- Make An Offer
SureCall FusionTrek is Sprint Cell Phone Signal Booster for Car, Truck, RV to boost cellular signals to any single device placed in cradle.* Such a mobile device that can benefit from it can be cellphone or mobile hotspot (Mi-Fi) regardless of its size. It is the first plug and play cell phone signal booster for vehicles that does not require outside antenna & cable.
It is certified by Federal Communications Commission (FCC) for use with Sprint mobile network and all other American mobile service carriers in USA (except Sprint band 26 on lower 800 MHz frequency and Sprint band 41 on 2500 MHz frequency for which no signal booster is available in USA - Check with Sprint if your phone uses those two frequency typically used only for wireless data transfer).
*Most Sprint customers will notice a marked improvement in cell signal when using one of the following signal boosters for Sprint; however, a small section of the Sprint network using a certain frequency has been prohibited from boosting by current Government regulations.
In addition to this automotive kit, we carry Sprint in-building cell phone signal booster kit. Buy them both to enjoy better Sprint Mobile coverage reception in car/ truck as well as in home/ office.
This cell phone signal booster kit for use with Sprint network as well as all other service provider networks in USA works in all types of vehicles such as cars, trucks, recreational vehicles (RVs). It boosts signal to a single wireless device. That device must contain SIM card with paid wireless subscription plan and must be placed on magnetic cradle. Installation includes placing magnet adhesive on back of your cell device so that it attaches simply as you touch it to the cradle.
Installation is quick and easy with no exterior antenna to install, making it very portable so it can be moved from one vehicle to another when needed. However, only one cellular device placed on or attached to cradle of this signal booster kit will get the signal strength boost. That mobile device can be smartphone, mobile hotspot device such as MiFi, Jetpack, etc. Boost signal reception inside cars, trucks, recreational vehicles (RVs), and boats with stronger connection with respective network's cell tower including Sprint signal tower.
Strong connection means fewer missed or dropped calls, fewer incoherent conversations when talking, fewer Internet hang-ups or freezing / buffering when surfing the web on mobiles or tablet computers. Talk on cell phone with clear conversations, instant texting, and fast 3G + 4G LTE mobile internet downloads and uploads after installing this vehicle cell phone signal amplifier kit. It installs easily using "Do It Yourself" (DIY) installation instructions included.
This in-vehicle mobile phone and hotspot signal amplifier purchase consists of SureCall FusionTrek Booster which has a built-in receiving antenna. The kit includes the hands-free cradle where mobile device stays in place. That cradle has prongs on the back to plug into any vehicle vent. This wireless amplifier kit includes a 15 ft. cable which connects antenna from back of vehicle to the cradle. It includes a DC power supply to keep it powered when needed. Unplugging the power supply will turn it off when not in use.
Specifications of Signal Booster Kit for Sprint.
|Model Number | UPC||SC-FusionTrek-SPRINT | 697691011004|
|Frequency||Uplink: 698-716 / 776-787 / 824-849 / 1850-1915 / 1710-1755 (G Block Included); Downlink : 728-746 / 746-757 / 869-894 / 1930-1995 / 2110-2155 (G Block Included).|
|Supported Standards||CDMA, WCDMA, GSM, EDGE, HSPA+, EVDO, LTE and all cellular standards|
|Input/ Output Impedance||50 ohm.|
|Gain Adjustment||20 dB (Automatic).|
|Noise Figure||≤7 dB|
|Operating Temperature||-14ºF to +122ºF|
|DC Car Charger||8V-15V DC|
|Maximum RF Output Power||1 Watt EIRP|
|Power Consumption||< 12 Watts|
|Dimensions||7.5" x 3.5" x 1.6"|
|Cable Length||15 Feet|
|Model Name||FusionTrek (correct). Also incorrectly referred as FusionTech, Fusion Tech.|
SureCall FusionTrek Cell Phone Booster for Sprint - Installation Video:
Questions & Answers
QUESTIONS & ANSWERSAsk a Question
Is this portable? Can it be moved easily from one vehicle to another? How long does installation take?
Yes, it is quite portable because no exterior antenna needs to be removed which is the most time consuming part of other vehicle cell phone signal booster installations. As you may or may not know, to run an exterior antenna cable into the vehicle involves prying open the rubber door seal to insert that wire and then pressing the rubber seal along the edge to seal it back in. That is not needed for installing this signal booster kit - Therefore, installation takes only about one minute.
Will this work on iPhone 8 in an RV?
Yes, it is designed work to improve reception in RV or any other vehicle, on any cellphone including Apple iPhone 8, operating on any carrier's wireless network except on a particular 2.5 GHz frequency that Sprint uses in some areas.
Sprint uses 3G & 4G LTE signals and all signal boosters enhance 3G & 4G LTE signals except they do not enhance on a particular frequency, 2.5 GHz, in some areas so there is a chance this may work or may not work for you.
At times it does not work, if you can force your iPhone to use Sprint's 3G backup network by going into phone settings and making this change, then it should work in those areas as well.
Data Sheet / User Guide
Make An Offer
Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.
Kevin K. of Anderson, California gave the following review:
Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.
Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.
If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.
For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.