Internet service NOT required for all of the simple plug and play cell phone signal boosters (some of them also listed below) listed below. These plug and go signal boosters are very easy to install, because they don't have external antennas to be installed outside home/ apartment/ building nor on roof of car/ truck/ RV. This makes them useful if you need a signal booster at a specific location for a short while and then want to move it to use somewhere else. This is not to say that you can't install them in one fixed location. Places like an apartment where you don't have access to roof for installing an outside antenna are ideal candidates for these simple cell phone boosters.
In this article, we will look at one simple plug play signal booster suitable for vehicles and a number of plug & go cell phone boosters that can be used in the home, or office type setting.
FusionTrek 4G LTE Vehicle Signal Booster (For one Cell Phone).
The FusionTrek is a simple plug and play signal booster for vehicles that doesn't need an outside antenna & cable. It is one of our phone cradle cellular boosters. This plug and go 4G LTE cell phone signal booster kit is for any vehicle, including cars, trucks, recreational vehicles (RVs), and boats. It can boost signal to a single cell device, which could be any cellphone/ cellular device containing SIM card as long as it is attached to the magnetic cradle. Installation includes placing magnet adhesive on the back of your device so that it attaches as soon as you touch it to the cradle.
With no exterior antenna to install, installation is quick and easy. This makes the booster very portable so it can be moved from one vehicle to another when required. The cellular device placed on or attached to cradle of this cell signal booster kit will get a tremendous signal boost. It works for all cellular service providers in USA such as AT&T Wireless, Verizon Wireless, T-Mobile, and Sprint, as well as for all mobile service carriers in Canada such as Rogers Wireless, Telus Mobility, Bell, and Freedom Mobile.
Boost the signal reception inside your car, truck, recreational vehicle (RV), and boat with a stronger connection to the cell tower. This will provide clear voice conversations, instantaneous texting, and fast 3G + 4G LTE mobile internet downloads and uploads. FusionTrek kit can be installed easily using the DIY installation instructions included.
The kit includes the signal booster, the hands-free cradle, a 15 feet cable, and a DC power supply. Browse other non-plug & play car cell phone signal boosters if you would like to compare.
EZ 4G LTE Plug & Play Signal Booster For Homes up to 2000 sq. ft.
This revolutionary plug and play cell signal booster for homes is suitable for homes, apartments and offices up to 2000 sq. ft. This particular plug and go cell phone signal booster is very straightforward to set up in minutes. It has an elegant plug-and-play design that will enhance your home décor, without the need to drill holes or mount an antenna outside. It boosts cellular signal indoors for all North American carriers.
It offers powerful signal boosting of voice calls, text, 3G, and 4G LTE. It provides signal coverage for 1-2 rooms in your home or small office, with a built-in antenna to improve data performance for all mobile users within up to 2000 sq. ft. range.
With this simple plug-and-go cell booster, you can reduce the number of missed and dropped calls, increase data speed, and improve cellphone signal with ease. It is the easiest way to boost your cellular signal, 3G and 4G LTE performance.
As there's no roof antenna, this system is especially ideal for apartment dwellers, and other renters who cannot make changes to their roof, but still want to get better reception inside their homes or apartments.
To install, you simply place a large round antenna by the window of the room where you want to improve reception. That antenna receives the signals broadcasted by all of the cellular service carriers from all of the cell phone towers in area and then amplifies them by up to 72 decibels. Amplified cell signals are then transmitted in the room by a desktop unit that must be positioned at least 20 feet away from the window receiver. Smart phones, tablets, mobile hotspots, and all other cellular devices then receive the signals from their specific carriers.
It can be used with any smartphone or tablet model that has 3G & 4G LTE connectivity from any U.S. or Canadian cellular carrier. The system works with 700 MHz, 850 MHz, 1900 Mhz, and AWS 1700/ 2100 MHz frequencies. Therefore, it works with all USA cell service providers including AT&T Wireless, T-Mobile, Sprint (Voice-Only), and Verizon Wireless. It also works on all Canadian mobile networks including Bell Mobility, Rogers Wireless, Telus Mobility, and Freedom Mobile.
This advanced five-band home cellular booster goes into a dormant state when not being used, so that you can limit energy use. Auto Gain Control allows this unit to self adjust. Approved by FCC in USA and Industry Canada (IC) in Canada for use on all wireless phone carriers such as Verizon, T-Mobile, AT&T, Rogers, Telus, Bell, Fido, etc. Stylish, modern design enhances your decor. It is backed by an industry best 3-year warranty by its manufacturer.
PRO Smart Signal Booster for AT&T 3G & LTE.
AT&T plug and play network booster kit made by Cel-Fi sets up in minutes due to its easy plugging & playing installation. It is so powerful that it amplifies weak wireless signal to up to 100 dB Gain. Internet service NOT required as this amplifier boosts existing cellular signal without requiring broadband wifi. At least one mobile signal bar is however required in one spot indoors to amplify. Improves cell phone signal strength inside homes, offices, apartments. No maintenance required - Self-adjusts & reconfigures automatically.
DUO+ Smart Signal Booster for Verizon LTE/ XLTE/ VoLTE.
The DUO Plus is small and compact Verizon plug & play network booster made by Cel-Fi Nextivity. This easy cell phone booster kit is packed with features, and requires minimal setup. All you need to do is place the unit where you need the most coverage, and it will configure itself to communicate as needed. There're no extraneous cabling or antennae to deal with. The CelFi DUO also offers boosting for UMTS/ WCDMA voice signals on the Verizon network. It uses patented echo-cancellation algorithms for stronger, clearer signals. Therefore, dual band boosting on frequencies 2 (1900MHz), 4 (1700/2100MHz), and band 13 can occur simultaneously.
This easy plug & play cell signal booster kit has two separate units. The window unit captures signals from the closest Verizon cell tower within range and sends it inside the building, where the coverage unit then takes over by providing boosted signals in the surrounding home or business. Automatic channel selection feature on the 5 GHz link makes sure there's no interference with other electronic equipment such as Wi-Fi routers, cordless phones, baby monitors etc.
DUO+ Smart Signal Booster for T-Mobile.
The DUO+ is a small & compact T-Mobile plug play network signal booster packed with features and requires minimal setup. It is a plug play booster - all you need to do is place the Tmobile window unit and then the coverage unit where you need the most coverage. Both will configure themselves and communicate as needed. There's no extraneous cabling or antennae. The DUOPlus also offers boosting for UMTS and WCDMA voice signals on the T-Mobile network. It uses patented echo-cancellation algorithms for stronger, clearer signals. Therefore, triple band boosting on frequencies 2 (1900MHz), 4 (1700/2100MHz), and band 12 can be done at the same time.
The DUO Plus signal amplifier consists of two separate units. The window unit captures signals from the closest T-Mobile cell tower within range and sends it inside the building. The coverage unit then takes over by providing boosted signals in the surrounding home or business. Automatic channel selection feature on the 5 GHz link makes sure there's no interference with Wi-Fi routers, cordless phones, baby monitors etc. It works for all cellular devices on the T-Mobile network.
PRO Smart Signal Booster for Bell Mobility.
Bell Mobility plug and play network cell booster made by Cel-Fi boosts Voice and Data on Bell 3G, 4G and 4G LTE network technologies. It offers up to 100 dB of gain approved by IC (Industry Canada), allowing one system to cover up to 13,000 sq. ft. It includes 2 years limited manufacturer warranty. At least 1 bar of cellular service is needed for this product to boost your signal, minimizing dead zones and reducing dropped calls.
To install, find one spot in your home/ office where your mobile device receives at least 1 bar (between -104 dBm RSCP 3G/4G and -120 dBm 4G LTE RSRP) of usable 3G, 4G or 4G LTE cellular signal. Place your Network Unit (NU) in this location, and then place the Coverage Unit (CU) where you would need enhanced wireless coverage the most, minimizing dead zones and dropped calls.
PRO Smart Signal Booster for Rogers Wireless.
Rogers Wireless plug play network phone booster made by Nextivity's Cel-Fi boosts Voice and Data on Rogers 3G, 4G and 4G LTE network technologies. This is the only consumer booster with up to 100 dB of gain approved by IC (Industry Canada). This allows one system to cover up to 13,000 sq. ft. At least 1 bar of cell service is required for this product to boost your signal. As long as there's mobile reception equivalent to one signal bar, Cel-Fi PRO helps minimize dead zones and reduce dropped calls.
To install, use your mobile device to find your best indoor signal. Place the Network Unit in the location found with your cell phone and connect it to a power source. Place your Coverage Unit where you need coverage the most and plug it in. Installation completely done. Purchase includes 2 years limited manufacturer warranty.
PRO Smart Signal Booster for Telus Mobility.
Telus Mobility plug & play cell phone booster is made by Cel-Fi. It is based on Nextivity's third-generation Baseband Processor. 3rd gen. processor features built-in intelligence that enables the signal booster to automatically sense and adapt to HSPA and LTE network environments without interfering with operator networks and other devices. It provides concurrent Quad Band boosting in bands 2 (1900MHz), 4 (1700/2100MHz), 5 (850MHz) and 12/17 (700MHz). Automatic channel selection feature on the 5 GHz link makes sure there's no interference with other electronic devices. The installation of this cell phone signal booster kit is very easy because it involves only three steps. No cabling or configuring required.
PRO Smart Signal Booster for Freedom Mobile.
Freedom Mobile plug & play signal booster is made by Nextivity Cel-Fi company. This mobile signal amplifier boosts existing cellular signal. This mobile amplifier kit sets up in minutes - Easy plug-play cell phone booster installation. At least one cell signal bar is required in one spot indoors to amplify. It is so powerful that it amplifies weak wireless signal to up to 100 dB Gain. It improves cell phone signal strength inside homes, offices, apartments. No maintenance required as it self-adjusts & reconfigures automatically.
PRO Smart Signal Booster for Videotron.
Videotron plugplay network cell phone booster by Cel-Fi boosts Voice and Data on Videotron 3G, 4G and 4G LTE network technologies. It is the only consumer booster with up to 100 dB of gain approved by IC (Industry Canada), allowing one system to cover up to 13,000 sq. ft. Cel-Fi Nextivity manufacturer warranty period is two years. As long as there's mobile reception equivalent to one signal bar, Cel-Fi PRO helps minimize dead zones and reduce dropped calls.
PRO Smart Signal Booster for Eastlink Wireless.
Eastlink Wireless plugging and playing network amplifier by Cel-Fi utilizes Nextivity's third-generation Cel-Fi Baseband Processor. It features built-in intelligence enabling the mobile signal booster to automatically sense and adapt to HSPA and LTE network environments without interfering with operator networks and other devices. It provides concurrent Quad Band boosting in bands 2 (1900MHz), 4 (1700/2100MHz), 5 (850MHz) and 12/17 (700MHz). Installing the mobile booster kit is very easy as no cabling or configuring is required.
Place your Network Unit (NU) in a spot in your home/ office where your mobile device receives at least 1 bar (between -104 dBm RSCP 3G/4G and -120 dBm 4G LTE RSRP) of usable 3G, 4G or 4G LTE cellular signal. Place the Coverage Unit (CU) where you need enhanced wireless coverage the most to minimize dead zones and dropped calls. Installation complete.
While simple and easy plugging-playing cell signal boosters are convenient to install and use, they do require some signal indoors in any one area for them to amplify reception in other areas of the home, apartment, office, or entire building floor. If in an event minimal required signal is unavailable, consider other in-building USA cell phone signal boosters or in-building Canadian cell phone signal boosters we carry that entail installing an exterior antenna to get signal indoors from outside the house or building. Such signal boosting kits that have external antennas are far more powerful and boost greater areas indoors when signal is better outside than inside.
Share this post