Menu
Cart 0

Cel-Fi GO M 65dB Vehicle Kit For Any Service Provider*

Cel-Fi GO M 65dB Vehicle Kit For Any Service Provider*

  • $1,050.00 USD
Best Price Guarantee. [1, 2, 3]
  • Product Url
  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • *These fields required. [2] May exclude very large size items because we offer free shipping so our actual cost may be too high due to the size/ weight of item to be able to match the price. [3] Request must be made before order placement. Not valid after order placed. Other restrictions may apply. Please contact us for details.

Buy Now, Pay Later with No Interest if paid in full within 6-12 months. Choose Klarna payment option at the checkout for details of this, and other long-term low-interest financing options.

Free Lifetime Support. SKU / Model: GO+TRUCKER+BUNDLE

Best Price Guarantee [1 2 3]

Attention please:

Cel-Fi kits are an exception to our standard return policy and do not qualify for our 60 days money back guarantee. In addition, they do not qualify for any discount offers nor any coupon codes.

Due to Cel-Fi manufacturer requirements regarding returns of their Cel-Fi kits - this kit, if returned, must be returned in "mint condition" within 30 days of purchase date. If not received in mint condition within 30 days of purchase, the manufacturer will not accept the return and the kit will have to be returned back to you - no refund will be issued.

Thank you for your co-operation regarding this important matter.

 

Call for FREE consultation:

1(855)846-2654

Need installation quote, or help with designing a custom solution? Submit a request for quote.

  • Description
  • Reviews
  • Questions & Answers
  • Data Sheet / User Guide
  • Make An Offer
  • Warning

Description

Product Description

Nextivity Cel-Fi GO M vehicle cell phone signal booster is for boosting reception with up to 65 dB Gain on any single carrier network (switchable) such as Verizon, T-Mobile, AT&T, Sprint, or US Cellular. With this new version Cel-Fi GO M, the carrier can be switched to any Carrier of choice within seconds by using its Smartphone app, Cel-Fi WAVE.*

The same unit, Nextivity Cel-Fi GO signal booster is switchable to boost signals of any major carrier network. If ordering from USA, U.S. American version will be shipped to set to any U.S.A. Carrier. If ordering from Canada, Canadian version will be shipped to set to any Canadian Carrier. Instructions will be included with purchase. In USA, covered networks include AT&T Wireless, Verizon Wireless, T-Mobile, Sprint, U.S. Cellular and GCI Alaska (or pick these if using MVNO, of these major U.S. Carriers). In Canada, it will work for the Rogers Wireless, Bell Mobility, Telus Mobility, SaskTel, and Videotron networks (or pick these if using subsidiary of any of these major Canadian Carriers).

Cel-Fi Go Mobile's suitable for using in vehicles including cars, trucks, SUVs, RVs and marine vessels. The Go-M uses Nextivity's Cel-Fi Smart Signal Booster technology to significantly boost voice and data coverage for 3G, 4G, and LTE.

What is included?

Based on the type of kit chosen from the drop-down menu, it will contain parts as listed below:

Auto Antenna & Magnet Mount Kit (Cel-Fi GO Mag. Antenna Vehicle Bundle):

GO-M or GO+MAG+BUNDLE: GO Plus Amplifier + Server Antenna Model A41V30100 + Magnet Antenna Model A41V21100 + 12V DC Power Adapter + Cables.

  • Nextivity Cel-Fi GO Band 2/4/5/12/13 Amplifier (SKU: 590NG32GWUS5VZUSBTF1).
  • Nextivity Cel-Fi GO-M Outdoor Donor Antenna (Magnet Mount), Black 10 ft. Cable, LTE (SMA-M Connector) [SKU: 591NA41100C64V35].
  • Nextivity Cel-Fi GO-M Indoor Mobile Server Antenna (Adhesive Mount), Black 13 ft. Cable, LTE SMA Connector (SKU: 591NA41200C60V30).

Auto Antenna & Screw Mount Kit (Cel-Fi GO NMO Antenna Vehicle Bundle):

GO+NMO+BUNDLE: GO Plus Amplifier + Server Antenna Model A41V30100 + NMO Antenna (Roof Drilled Screw On Mount) Model A41V36100 + 12V DC Power Adapter + Cables. Professional installation required.

  • Nextivity Cel-Fi GO Band 2/4/5/12/13 Amplifier (SKU: 590NG32GWUS5VZUSBTF1).
  • Nextivity Cel-Fi GO-M Outdoor Donor Antenna (NMO Mount), Black 10 ft. Cable, LTE (SMA-M Connector) [SKU: A41-V36-100].
  • Nextivity Cel-Fi GO-M Indoor Mobile Server Antenna (Adhesive Mount), Black 13.1 ft. Cable, LTE SMA Connector (SKU: 591NA41200C60V30).

Truck or RV Antenna & Mirror Mount Kit (Cel-Fi GO RV/Truckers Bundle):

GO+TRUCKER+BUNDLE: GO Plus Amplifier + Server Antenna Model A41V30100 + RV / Trucker Antenna Model A21V31100 + 12V DC Power Adapter + Cables.

  • Nextivity Cel-Fi GO Band 2/4/5/12/13 Amplifier (SKU: 590NG32GWUS5VZUSBTF1).
  • Nextivity Cel-Fi GO-M Outdoor Wideband Trucker Omni Antenna with Standard Mirror Mount, Black 13.1 ft. Cable, LTE SMA-Male Connector (SKU: 591NA21260C64V31).
  • Nextivity Cel-Fi GO-M Indoor Mobile Server Antenna (Adhesive Mount), Black 13.1 ft. Cable, LTE SMA Connector (SKU: 591NA41200C60V30).

Marine Antenna, Mount, 30 ft. Cable Kit (Cel-Fi GO Marine Bundle):

GO+MARINE+BUNDLE: GO Plus Amplifier + Server Antenna Model A41V30100 + Marine Antenna Model A11V37100 + 12V DC Power Adapter + Cables.

  • Nextivity Cel-Fi GO Band 2/4/5/12/13 Amplifier (SKU: 590NG32GWUS5VZUSBTF1).
  • Nextivity Cel-Fi GO-M Outdoor Wideband Marine Omni Antenna with Standard Marine Mount, White 20 ft. Cable, LTE SMA Male Connector (SKU: 591NA11260C64V37).
  • Nextivity Cel-Fi GO-M Indoor Mobile Server Antenna (Adhesive Mount), Black 13.1 ft. Cable, LTE SMA Connector (SKU: 591NA41200C60V30).
  • 30 ft. LMR-400 Coaxial Cable Assembly with SMA Male to SMA Female Connectors (SKU: GW400-360-SM-SF).

Model number details:

With advanced capability now to change Carrier on the go using Cel-Fi WAVE Smartphone app, the various model #'s listed below are no longer necessary. Any one will work for any Carrier. This purchase is model number Cel-Fi GO G32-2/4/5/12/13MK or Cel-Fi GO G32-2/4/5/12/13P (with car power supply adapter) which can now work on any Carrier network. Nevertheless, here's the list of model #'s as they used to be sold as:

  • AT&T: 590NG32GWUS6ATUS6TF1.
  • Verizon Wireless: 590NG32GWUS6VZUS6TF1.
  • GCI Alaska: 590NG32GWUS6GCUS6TF1.
  • US Cellular: 590NG32GWUS6UCUS6TF1.

This Cel-Fi GO M Vehicle Bundle has the vehicle cell phone signal booster kit with several antenna options. One comes with magnet-mount exterior roof-mount antenna. Second has optional screw mount NMO antenna (part # A41-V36-100 / A41V36100 / 591NA41100C64V36 and kit UPC 697691004242). Third has RV or Trucker antenna (A21-V31-100 / A2-V31100 / 591NA21260C64V31 - kit UPC 697691004259), and fourth has Marine antenna (part # A11-V37-100 / A11V37100 / 591NA11260C64V37 with 30 feet cable part # GW195-360-SM-SF cable type LMR-195 and connector SMA Male to SMA Female, and kit UPC 697691004266). See drop-down menu for options to buy this kit with respective optional antennas.

What unique about this kit?

Nextivity Cel-Fi GO-M Band 2/4/5/12/13MKit provides gain of 65 dB with Intelliboost technology. This is the highest Gain allowed by FCC on a moving vehicle. It is a Smart signal booster. This means that the GO M can adjust to changing cellular network conditions automatically while you're on the move. This unit also supports multiple devices. The NEMA 4 weather resistant rating means that the unit is protected against windblown dust and falling dirt, and water such as rain, snow, sleet and hose directed water. The unit will not be damaged if ice forms on the outside of the enclosure.

What are differences between various vehicle type bundles?

The basic magnet mount antenna kit is best for any automobile. It is easy to install with magnet mount antenna. The NMO screw on fixed mount antenna is excellent for fleets. The permanent antenna solution prevents theft or loss for fleet vehicles. The Cel-Fi GO M for RV / Truckers bundle includes the Cel-Fi Trucker Antenna with over 13 ft. cable and Server Antenna with over 13 ft. cable. It is an ideal solution for cross country trucking or remote RV stays. The Cel-Fi GO M for Marine bundle includes the Cel-Fi Marine Antenna and Server Antenna, plus 30 ft. of cable. It is an ideal solution for near shore or water recreational, ferrying, or shipping vessels.

Important limitations.

As Cel-Fi GO M only boosts signals for any one carrier at a time, it is a good choice for one or more people on a single network such as Verizon Wireless, T-Mobile, AT&T Wireless, Sprint and US Cellular. However, if multiple people on multiple networks are using the vehicle, a multi-carrier booster that works simultaneously on all carrier networks such as this car/ truck signal booster or marine boat/ rv cell phone signal booster may be a better option.

Cel-Fi WAVE Mobile App.

Cel-Fi WAVE smartphone app runs on the GO M and will help you get the best performance from it. That app is available for Android and iOS. It provides a User Interface to Cel-Fi systems. Application's dashboard shows the system's "Boost" value, allowing you to monitor the signal gain the GO M provides.

Benefits.

  • Mobile Coverage for cars, trucks, RVs, and boats.
  • Boosts 3G / 4G / LTE Voice and Data.
  • NEMA 4 Rating.
  • Multi-Carrier Support with Carrier Switching (one carrier coverage at a time).
  • App for Optimized Performance.
  • Network Safe.

Outside Antennas:

Cel-Fi GO M offers a choice of several donor (outside) antenna options.

Both the Cel-Fi Mobile Magnetic Mount and Screw Mount Antennas are two of the best-performing antennas in their footprint on the market. They are outdoor wideband cellular omni-directional antennas with 2 to 4 Decibel Gain.

Both feature weather resistant IP 67 plastic casing and have 3 meters (10 ft) of DACAR302 coaxial cable attached. Cel-FI Mobile Mag. Mount Antenna is built to magnetically attach to cars, trucks, vans, SUVs, and RVs. The Cel-Fi Screw Mount Antenna has screw fixings.

Cel-Fi RV / Trucker antenna features a heavy-duty spring base and includes a mirror-mount for easy installation.

Cel-Fi Marine antenna for yachts and ships offers threaded ferrule/post for side or bottom cable exit for standard marine mount interface. It is weather resistant with built-in ground plane.

Inside Antenna:

Cel-Fi Mobile Server Antenna is a cellular / LTE patch antenna. It has up to 2.5 dBi of gain. The antenna has an adhesive mount for ease of installation. It has 4 meters (13 ft) of RG-174 cable attached.

Compatibility:

This signal amplifying unit will boost 2G, 3G, 4G, LTE Voice and Data on all networks but may not boost 4G on Sprint network in some areas.

Installation.

Cel-Fi GO M can be installed by persons who are comfortable running cabling and doing simple car maintenance. You might however consider asking a friend, finding a local electronics installer/ handyman, or an auto repair/ detailing shop to install it for you. Are you installing in a vehicle that will stay stationary for a while, such as a recreational vehicle (RV)?

If you are not moving, you can switch the GO-M to stationary mode on the Cel-Fi WAVE app to use up to 100 dB of gain and coverage up to 12,000 sq ft. The coverage will depend on the antenna isolation, antenna choice, and mode it is set to. You can always use a panel antenna inside to direct the signal towards a specific direction to increase the coverage bubble or even use two antennas one inside and one outside when you are stationary.

The more separation between the antennas, the larger the coverage bubble.

Below is one example.​

Example of CelFi GoM Installed in RV

Please call us if you have any questions.

Specifications.

Supported Phones. Cell Phones, Hotspots, and any Device that uses Cellular Data.
Gain. 65 dB.
Impedance. 50 ohm.
Output power. Maximum UL power 20-22dBm EIRP, Maximum DL power 10dBm per 5 MHz EIRP.
Power supply. In-Car Charger Included.
Loss. 8 dB.
Connector type. SMA Female.
Auto Magnet Exterior Antenna Model SKU GO PLUS + A41-V30-100 + A41-V21-100 | GOPLUS + A41V30100 + A41V21100
Auto Screw (NMO) Exterior Antenna Model SKU GO PLUS + A41-V30-100 + A41-V36-100 | GOPLUS + A41V30100 + A41V36100
Truck / RV Exterior Antenna Model SKU GO PLUS + A41-V30-100 + A21-V31-100 | GOPLUS + A41V30100 + A21V31100
Marine Exterior Antenna Model SKU GO PLUS + A41-V30-100 + A11-V37-100 | GOPLUS + A41V30100 + A11V37100
Manufacturer's Warranty Period. Two years.

 

Cel-Fi Go Plus For Vehicles

Alternate part names:

  • cel-fi go
  • celfi go
  • cell-fi go
  • cellfi go
  • cel-figo
  • celfigo
  • cel-fi gom
  • celfi gom
  • cell-fi gom
  • cellfi gom
  • cel-figom
  • celfigom
Consumer Alert:
Consumer Alert

Reviews

Customer Reviews

Questions & Answers

QUESTIONS & ANSWERS

Ask a Question
  • No bars-My unit is not finding the cellular signal.

    If you have no bars, your unit may still be trying to find the cellular network. Your unit may display a blinking green power indicator, this can sometimes take more than a few minutes. If you have bars of service on your phone at the location of your donor antenna but not at the server antenna, after 60 minutes try a simple restart. To restart your unit simply unplug it for few seconds and then plug it back in. If the restart does not solve the issue please reach out to your point of sale for support.

  • Can Cel-Fi GO boost the signal of multiple cellular networks at once?

    Cel-Fi signal boosters are operator specific, and will only boost one operator at a time. Being operator specific is one of the main reasons that we are network safe and can provide 100 dB of signal gain, and why we are the only signal booster approved by a growing number of operators.

  • Why do I have to register my Cel-Fi?

    Why is this being done?  Because cellular systems are protected assets of the Operators that own them.  

    Many boosters in the market cause problems for those networks (which means all of us using the networks too).  

    New FCC/Operator approved boosters are better and don’t cause problems, and Cel-Fi is the only booster in a special class of boosters that allows 100 dB of signal gain (30 dB or 1000x the gain of all other boosters).

  • How do I register my Cel-Fi system?

    The process is very simple and just takes a minute by following the link below to your Operator's Registration site.  If your system was provided by your Operator it may be preregistered (see product box insert).  

    In USA:  

    If your operator is T-Mobile, MetroPCS, TruPhone, or another T-Mobile network operator please register your booster at: T-Mobile Booster Registration.

    If your operator is AT&T, Aio, or another AT&T network operator please register your booster at: AT&T Booster Registration

  • No LTE - My phone still doesn't have LTE.

    There are a few reasons why your phone would experience an issue with the LTE service. You may not have LTE in your area, your Cel-Fi system may have lost the LTE signal due to intermittent network outages, or your phone may not support LTE. Check to see that your phone shows an LTE signal in the location of your donor antenna.

  • I’ve installed Cel-Fi but I do not see more bars on my phone.

    There could be several reasons for this:  

    First try toggling airplane mode on your phone near the server antenna, this will allow your handset to have a fresh look at the available channels. Also verify that your phone is compatible with the channels that your Cel-Fi system is boosting (maybe your handset is "unlocked" and actually does not fully support all your current operator’s channels). iPhones can also show fewer "bars" of signal if the network is heavily loaded.

  • My Status Indicator is solid red.

    There are several reason why your status light would be flashing red. The best way to determine the specific reason for your flashing light is to use the WAVE Mobile application while connected to your device. For more information about Cel-Fi WAVE please visit www.cel-fi.com/wave.

  • My Status Indicator is flashing red.

    There are several reason why your status light would be flashing red. The best way to determine the specific reason for your flashing light is to use the WAVE Mobile application while connected to your device. For more information about Cel-Fi WAVE please visit www.cel-fi.com/wave.

  • My Status Indicator is solid green but my phone still have poor signal at the donor antenna.

    If your Cel-Fi GO has a solid Status Indicator light in either yellow or green, the system is fully functional.

    If your system has a solid (non-red) status light but your phone is not picking up a stronger cellular signal you might need to check the server antenna, make sure that your server antenna is fully functional.

    Try swapping out your server antenna with another antenna. If the issues persists please reach out to your point of sale for support.

  • My Status Indicator is blinking green but my phone still have poor signal at the donor antenna.

    A blinking green status light indicates that your Cel-Fi GO is still in the startup process. Depending on the complexity of your cellular network, this process can take some time. If the units is still blinking for more than 30 minutes please attempt a restart. This is not something that should continue, but if it occurs frequently please reach out to your point of sale for support.

  • No Power – The unit is not lighting up.

    When your system does not power up, one of the following things could be happening. You could have a power adapter failure, a hardware failure, or the system could need a simple restart. Make sure that you power source is a functional outlet. Test something else, that you know works in the same outlet, or try moving the Cel-Fi GO to another outlet that you have confirmed has working power. Still Not Working? It is possible that you have a bad power supply, or malfunction of your Cel-Fi GO hardware. This is not something that should continue, but if it occurs frequently please reach out to your point of sale for support.

  • I ordered the wrong bundle, I bought kit for a car, and not for a boat. I'll need to return this?

    Yes, you can return the wrong bundle you ordered (Cel-Fi Auto/Car Bundle) and buy Cel-Fi marine kit with interior patch antenna & 13 ft. cable or Cel-Fi marine kit with interior patch antenna & 18 inches cable, or you can buy missing parts as listed below:


    AC power supply (you would need this if your kit did not include this):
    https://www.signalbooster.com/products/replacement-ac-power-supply-for-cel-fi-go-x-and-go-m-signal-booster

    DC Power supply (you would need this if your kit did not include this):
    https://www.signalbooster.com/products/vehicle-power-adapter-with-nema-4-plug-for-cel-fi-go-m-signal-booster

    Marine Exterior Antenna (you would need this if your kit did not include this):
    https://www.signalbooster.com/products/marine-cell-phone-signal-booster-antenna-weather-resistant

    You should already have interior server antenna, and rest of items included in Marine kit because you purchased the Cel-Fi car kit.

  • What is the length of cables if I choose the truck / RV antenna kit?

    Both trucker outside antenna, and inside server antennas each come with over 13 ft. of cable totalling over 26 ft. of cable that you will have to set-up as needed inside truck or RV. Excess cable, if any, can be rolled up, tied with a rubber band, and placed securely wherever you can find room.

Data Sheet / User Guide


Data Sheet

User Guide

Make An Offer

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • This field is required. Please enter a value.

  • Input Correct Captcha

Warning

Note: For any signal booster to help, outside signal strength must be at least -110 dB or there must be a clear line of sight to a cell tower that is within twenty miles. Before ordering, please check outside signal level in decibels or ensure that you can make and hold a phone call at any good spot outside where you can mount an exterior antenna. Square footage stated in signal booster listings is based on good signal outside. If it is any weaker, the boosted sq. ft. area will be considerably lower, accordingly.

Kevin K. of Anderson, California gave the following review:

Website is easy to use with plain straight forward info but could have had more on testing signal strength to make sure you get a strong enough booster.

Therefore, please note that stated sq. ft. coverage is based on good signal outside. For best results: If outside signal is weak, we suggest choosing the next higher sq. ft. coverage kit. If outside signal is very weak, we suggest choosing the kit with even more higher sq. ft. range bracket. Basically, higher the sq. ft. bracket, the more powerful the signal amplifier with greater Gain as well as higher uplink and downlink output power.

If outside signal is too weak (weaker than -110 dB), submit request for cell coverage solution assessment. Upon receipt of questionnaire, we will perform residential or business site survey. This will help us determine the system that is needed to improve cell coverage. Then, we will create system design using that system such as femtocell, active or hybrid distributed antenna system (DAS), or other carrier feed signal enhancing method available that will work at your signal-challenged location. Finally, we will schedule for installation after equipment and installation service quote has been approved by you, or your company.

For non installation-included kits: Most home / office / building cell signal booster kits only include bracket to mount exterior antenna on outside wall, edge of roof, or existing pipe up to 2 inches in diameter. Mounting pole not included with most kits, unless stated specifically that it is included for free. Therefore, a mounting post must be purchased separately if you will require it to mount exterior antenna.


Related Products
Cel-Fi GO M 65dB Vehicle Kit For Any Service Pr...