Buy or Rent as Loaner: Portable RF Signal Meter or Mobile Spectrum Analyzer/ Scanner for detecting signal bandwidth, frequency, and RF signal strength in any area. SureCall signal detector detects wide range of cellular, mobile, wireless frequency band-width. It is an incredibly useful tool which allows you to accurately gauge cellphone signal bands and isolate them. With rental or purchase of this spectral analyzer or signal meter, any SureCall cell phone signal booster installer can find out where the best signal can be located within a property or building, and map the signal strength outside too. This signal tester allows you to aim directional antenna at cellular towers, and optimize your signal boosting capabilities, as well as monitor your equipments.

This radio frequency finder or radio frequency meter records major signal frequencies including LTE, AWS, PCS, and cellular. This cell phone signal tester is highly sensitive, and can read receive sensitivity up to -110 dbm. As well as the main record mode, you can select frequency band, and use the 'block power' mode. The SureCall signal meter is full of features, such as a backlit display screen, a portable design, and a handy 3.5 hours active life and recharge time. Whether you are a professional surveying an area, or you simply want to optimize your signal boosting kit, the signal meter is a crucial piece of equipment.

A versatile and sturdy portable signal meter at a must-have price! This signal meter measures RF signal for 4G LTE for every major carrier plus 2G and 3G PCS/ Cellular frequencies. SureCall CMMETER01 measures LTE for all carriers including LTE Verizon, LTE AT&T, AWS, Cellular, and PCS. With three selectable modes and backlit display, it is super-quick to learn and easy to use. You will get 3.5 hours of continuous battery life for the ultimate in portable versatility and a simple front-panel design that combines to make this a device you will reach for anywhere, anytime. Just recharge its 4-AAA NiMh batteries to head back out into the field. Take advantage of this must-have deal on an essential tool of the trade.

The CM-Meter-01 RF signal meter by Cellphone-Mate provides accurate information of radio frequency signals. The device can receive the RF signal from air an installed outdoor antenna or connects directly to the field antenna. This device works with LTE, Cellular, PCS and AWS bands. The purpose of the RF Signal meter is to assist in the installation of a Signal Booster, specifically for mapping the frequency environment, pointing directional antennas, and maximizing signal booster coverage.

Features:

• Five bands: 700 & 800 & 1900 & 2100 MHz (LTE, Cellular, PCS and AWS).
• High Receiving Sensitivity all the way to -110 dBm.
• Three selectable modes.
• Controllable backlight for dark environments.
• Rechargeable design with four AAA batteries.
• Long working time (2.5 - 3.5 hours).
• Easy to carry wherever you go, for scanning phone signals.

Downlink frequencies of all service carriers covered:

728- 746 MHz / 746-757 MHz / 869 - 894 MHz / 1930 - 1990 MHz / 2110 - 2155 MHz.

RF Signal Meter Package Contents:

• RF Signal Meter.
• 110 AC Power Adapter.
• Rubber Antenna.
• 9" and 24" SMA to N Cable Connectors.
• 4 AAA Rechargeable Batteries.
• User Manual.

Radio Frequency Signal Meter Specifications:

Turning on and Charging the Meter:

The power switch is used to turn on/off the device. The power supply interface is a mini USB interface. You can plug the AC power supply or any power source marked DC5V into it. Make sure that the power source can provide over 1 amp of current.The charging light is a green LED. When it is plugged in and the power switch is OFF, the LED will continue to blink while it is being charged. If the AAA batteries are fully charged, the LED will blink once. When the charging is finished, the LED will stay lit.

This SureCall cell phone signal meter or detector is comparable to Wilson Electronics weBoost or Wilson Pro 460118. This RF signal detector is now available per our RF signal meter loaner service.

RF Signal Meter Loaner Service.

Due to popular demand, we now offer RF signal meter loaner service program. The $8 per day rent of loaner begins on the day it is shipped. Rental term ends the day it is received by us in good working condition as tested and noted by us at time of shipment. Upon receipt, the deposit or cost of signal meter is refunded back to the same payment method as charged - minus $8 rental fee for each day. All days count for rental - including the days in transit, weekends and holidays. Please contact us for details if you have more questions. Thank you.